{"id":10422,"date":"2026-02-02T16:52:03","date_gmt":"2026-02-02T15:52:03","guid":{"rendered":"https:\/\/www.recyclemachine.net\/?p=10422"},"modified":"2026-05-05T17:10:34","modified_gmt":"2026-05-05T09:10:34","slug":"specifikace-drtice-pvc-trubek-regulace-prachu-dimenzovani","status":"publish","type":"post","link":"https:\/\/www.energycle.com\/cs\/specifikace-drtice-pvc-trubek-regulace-prachu-dimenzovani\/","title":{"rendered":"Specifikace drti\u010de PVC trubek: Kontrola prachu a dimenzov\u00e1n\u00ed (2026)"},"content":{"rendered":"

Recycling Polyvinyl Chloride (PVC) pipes presents three distinct engineering challenges: the brittleness of the material, the length of the feedstock (often 6m+), and the health risks associated with PVC dust. Selecting a PVC pipe shredder<\/strong> is not just about throughput; it\u2019s about managing chlorine-based polymers safely and efficiently. This guide outlines the specifications required for industrial PVC processing.<\/p>\n

Related equipment: rigid plastic shredder<\/a>, single shaft shredder<\/a>.<\/p>\n

The PVC Challenge: Impact & Dust<\/h2>\n

Unlike polyolefins (PE\/PP), PVC is shear-sensitive and brittle at room temperature.\n* Shattering Risk<\/strong>: When a high-speed rotor hits a thick-walled PVC pipe, it can shatter rather than cut, sending dangerous projectiles back up the hopper.\n* Dust Generation<\/strong>: Crushing brittle PVC generates fine white powder. Without proper containment, this creates a respiratory hazard for operators.\n* Thermal Sensitivity<\/strong>: If the cutting chamber gets too hot (>60\u00b0C), PVC degrades and releases corrosive hydrochloric acid (HCl) gas, which destroys standard steel blades.<\/p>\n

Key Shredder Specifications for Pipes<\/h2>\n

To handle these properties, specific machine configurations are required.<\/p>\n

1. Horizontal Feed vs. Top Feed<\/h3>\n

For pipes longer than 2 meters, Horizontal Shredders<\/strong> are superior to standard top-fed Hoppers.\n* Mechanism<\/strong>: A 6-meter vibrating trough or hydraulic channel pushes the pipe horizontally into the rotor.\n* Safety<\/strong>: Eliminates the need for “precipice feeding” (dropping long pipes into a high hopper), which is a major safety risk.\n* Energy Efficiency<\/strong>: The rotor bites the pipe end gradually, maintaining stable amperage (load) rather than spiking.<\/p>\n

2. Rotor Type: V-Cut vs. Flat<\/h3>\n

A “V-Rotor” or Concave rotor is essential for cylindrical pipes.\n* Centering<\/strong>: The V-shape naturally centers the pipe in the cutting chamber, preventing it from dancing or rolling against the side walls.\n* Cutting Action<\/strong>: Provides a scissor-like shear rather than a blunt impact, reducing noise and dust by up to 30%.<\/p>\n

3. Dust Extraction Integration<\/h3>\n

A PVC shredder is typically operated under negative pressure to capture dust at the source; the final requirement depends on your dust hazard assessment and local rules.\n* Air Filtration<\/strong>: An integrated cyclone system pulls airborne dust directly from the cutting chamber and discharge chute.\n* Sealed Bearings<\/strong>: Dust is abrasive. Outboard bearings (mounted outside the cutting chamber) prevent fine powder from destroying the grease seal.<\/p>\n

Sizing Your Machine: Diameter & Wall Thickness<\/h2>\n

The machine size is dictated by the pipe diameter (OD) and wall thickness (SDR).<\/p>\n\n\n\n\n\n\n\n
Pipe Diameter (OD)<\/th>\nRecommended Machine Type<\/th>\nMotor Power<\/th>\nRotor Diameter<\/th>\n<\/tr>\n<\/thead>\n
Small (< 250mm)<\/strong><\/td>\nStandard Single Shaft<\/td>\n37 kW (50 HP)<\/td>\n400mm<\/td>\n<\/tr>\n
Medium (250-630mm)<\/strong><\/td>\nHorizontal Pipe Shredder<\/td>\n55-75 kW (75-100 HP)<\/td>\n600-800mm<\/td>\n<\/tr>\n
Large (> 800mm)<\/strong><\/td>\nHeavy Duty Horizontal<\/td>\n110 kW+ (150 HP+)<\/td>\n1000mm+<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n

Maintenance for PVC Applications<\/h2>\n

PVC processing requires specific maintenance protocols to prevent corrosion and wear.\n* Anti-Corrosive Coating<\/strong>: The interior of the cutting chamber should be plated (e.g., Hard Chrome) to resist HCl corrosion if the material overheats.\n* Blade Material<\/strong>: Use D2<\/strong> or SKD11<\/strong> steel. Avoid standard mild steel, which wears too quickly against the rigid PVC formulation (often filled with calcium carbonate).\n* Temperature Monitoring<\/strong>: Install temperature sensors in the bearing housing to detect friction heat early, preventing PVC degradation.<\/p>\n

FAQ<\/h2>\n

Can I shred PVC and PE in the same machine?<\/h3>\n

Yes, mechanically speaking. However, cross-contamination is a disaster for recycling. Even 0.1% PVC in a PE melt stream will burn and degrade the entire batch. Thorough cleaning (vacuuming + purging) is typically required when switching materials.<\/p>\n

Why is my PVC turning yellow\/brown during shredding?<\/h3>\n

This indicates thermal degradation (“burning”). It means your blades are dull (creating friction heat instead of cutting) or your screen size is too small, causing material to dwell too long in the chamber. Sharpen blades and check the discharge rate.<\/p>\n

Do I need a granulator after the shredder?<\/h3>\n

Often yes. A shredder commonly produces 40-50mm chips; to reuse material in extrusion, many lines add a downstream granulator<\/strong> to reach a smaller regrind size (e.g., 6-10mm), depending on your product and feeding system.<\/p>\n

References<\/h2>\n

[1] “Handling and Processing of PVC,” VinylPlus<\/em>. Handling and Processing of PVC<\/a>\n[2] ISO 15270:2008 Plastics \u2014 Guidelines for the recovery and recycling of plastics waste. ISO 15270:2008 Plastics \u2014 Guidelines for the recovery and recycling of plastics waste<\/a><\/p>\n\n\n

Related Resources<\/h2>\n\n\n\n