{"id":18788,"date":"2026-05-01T16:15:58","date_gmt":"2026-05-01T08:15:58","guid":{"rendered":"https:\/\/www.energycle.com\/used-plastic-recycling-machine\/"},"modified":"2026-05-01T16:16:00","modified_gmt":"2026-05-01T08:16:00","slug":"maquina-de-reciclaje-de-plastico-usada","status":"publish","type":"post","link":"https:\/\/www.energycle.com\/es\/maquina-de-reciclaje-de-plastico-usada\/","title":{"rendered":"Used Plastic Recycling Machine: Buyer&#8217;s Guide for Second-Hand Equipment"},"content":{"rendered":"\n<p>A <strong>used plastic recycling machine<\/strong> can cost 40\u201370% less than equivalent new equipment, making it attractive for budget-constrained operations. But the wrong used machine costs more in repairs, downtime, and lost production than the savings \u2014 and there&#8217;s no warranty to fall back on. This guide covers when used plastic recycling machines make sense, the 8-point evaluation checklist for inspecting second-hand equipment, hour ratings that signal &#8220;good buy&#8221; vs. &#8220;near rebuild,&#8221; wear part conditions to verify, warranty considerations, and red flags that distinguish honest sellers from those offloading worn-out equipment.<\/p>\n\n\n\n<p>For new-equipment purchase guidance, see our <a href=\"https:\/\/www.energycle.com\/plastic-recycling-machine-for-sale\/\">plastic recycling machine for sale buyer&#8217;s guide<\/a>. For comprehensive cost analysis covering both new and used, see the <a href=\"https:\/\/www.energycle.com\/plastic-recycling-machine-prices-cost-drivers\/\">plastic recycling machine price guide<\/a>. This article focuses specifically on second-hand equipment.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">When Used Plastic Recycling Machines Make Sense<\/h2>\n\n\n\n<p>Used plastic recycling machines are NOT universally worse than new \u2014 but they&#8217;re better for specific buyer profiles and worse for others.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Used Equipment Works Best For:<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Budget-constrained startups<\/strong> \u2014 capital savings allow operation that wouldn&#8217;t otherwise be possible<\/li>\n\n\n\n<li><strong>Mechanical-heavy equipment<\/strong> \u2014 shredders, granulators, conveyors where wear is predictable and major rebuilds are documented<\/li>\n\n\n\n<li><strong>Buyers with technical expertise<\/strong> \u2014 operations that can perform their own evaluations, repairs, and rebuilds<\/li>\n\n\n\n<li><strong>Pilot operations and proof-of-concept<\/strong> \u2014 testing recycling business models before committing to new equipment<\/li>\n\n\n\n<li><strong>Specialized equipment in low demand<\/strong> \u2014 niche tire\/EPS\/PVC machines where new lead times are long and used market is thin<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Avoid Used Equipment For:<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>PLC-heavy and electronic-intensive equipment<\/strong> \u2014 modern dryers, pelletizers, sortation systems where electronic age dominates value<\/li>\n\n\n\n<li><strong>Food-contact applications<\/strong> \u2014 bottle-to-bottle PET lines need certified equipment with full documentation<\/li>\n\n\n\n<li><strong>First-time buyers<\/strong> \u2014 operations without internal technical expertise to evaluate, repair, or rebuild<\/li>\n\n\n\n<li><strong>High-uptime production environments<\/strong> \u2014 used equipment downtime risk often exceeds capital savings<\/li>\n\n\n\n<li><strong>Operations requiring documented warranties<\/strong> \u2014 for insurance, financing, or regulatory compliance<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Used Plastic Recycling Machine Pricing<\/h2>\n\n\n\n<p>Used plastic recycling machine pricing typically follows this curve relative to new-equipment cost:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Operating Hours<\/th><th>Typical Used Price (% of new)<\/th><th>Expected Remaining Life<\/th><\/tr><\/thead><tbody><tr><td>Under 5,000 hours<\/td><td>70\u201385%<\/td><td>80\u201390% of original life<\/td><\/tr><tr><td>5,000\u201315,000 hours<\/td><td>50\u201370%<\/td><td>50\u201370% of original life<\/td><\/tr><tr><td>15,000\u201330,000 hours<\/td><td>30\u201350%<\/td><td>30\u201350% of original life<\/td><\/tr><tr><td>30,000\u201350,000 hours<\/td><td>15\u201335%<\/td><td>10\u201330% (likely needs major rebuild)<\/td><\/tr><tr><td>Over 50,000 hours<\/td><td>10\u201325% (parts value)<\/td><td>Major rebuild required before use<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>Always verify operating hours via the PLC counter or hour meter \u2014 sellers&#8217; verbal estimates are typically optimistic by 30\u201350%. For older equipment without hour meters, calculate from production records (kg processed \u00d7 hourly rate) or component wear patterns.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">8-Point Used Plastic Recycling Machine Evaluation Checklist<\/h2>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Operating hours from PLC counter<\/strong> \u2014 verified via hour meter, not seller&#8217;s verbal estimate<\/li>\n\n\n\n<li><strong>Documented service history<\/strong> \u2014 maintenance log, parts replaced, major rebuild records<\/li>\n\n\n\n<li><strong>Wear part condition<\/strong> \u2014 blades, screens, bearings, belts inspected and current condition documented<\/li>\n\n\n\n<li><strong>Motor and electrical health<\/strong> \u2014 no signs of overheating, burned smell, or visible insulation damage; phase balance test recommended<\/li>\n\n\n\n<li><strong>Vibration test<\/strong> \u2014 running test under load reveals bearing wear, shaft misalignment, and rotor balance issues<\/li>\n\n\n\n<li><strong>Material trial<\/strong> \u2014 run your specific waste stream and verify capacity, output spec, energy consumption<\/li>\n\n\n\n<li><strong>Spare parts availability<\/strong> \u2014 manufacturer still in business? Standard or proprietary parts? Lead times for typical replacements?<\/li>\n\n\n\n<li><strong>Documentation completeness<\/strong> \u2014 original manual, electrical schematic, P&amp;ID, parts list, certificate of conformity for safety\/CE\/UL where applicable<\/li>\n<\/ol>\n\n\n\n<p>If the seller can&#8217;t provide all 8 items in writing, treat it as a red flag and either negotiate price down 20\u201330% to account for unknown risks, or walk away.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Wear Part Inspection: What Actually Matters<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Shredder &amp; Granulator Blades<\/h3>\n\n\n\n<p>Inspect cutting edge sharpness \u2014 original 90\u00b0 geometry visible vs. rounded\/worn. Measure blade width at multiple points; significant width loss (more than 15% of original) indicates near-end-of-life. Check fixed knife\/anvil for matching wear. Service life on used HDPE\/PP applications: 8,000\u201312,000 hours; for PVC: 4,000\u20136,000 hours due to abrasiveness. Replacement blade cost: $200\u2013$2,000 per set depending on machine size.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Screens (Granulator, Centrifugal Dryer)<\/h3>\n\n\n\n<p>Measure perforation diameter at multiple points \u2014 wear typically enlarges holes 10\u201320% before requiring replacement. Look for cracks, deformation, or local thinning. Wedge-wire screens last 8\u201314 months on rigid flakes; perforated plate screens last 6\u20139 months. Replacement cost: $200\u2013$1,500 per screen depending on size and material (304 SS standard).<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Main Bearings<\/h3>\n\n\n\n<p>Run the machine and listen for grinding, whining, or knocking \u2014 clean bearings run quiet. Check temperature after 30 minutes of operation; bearings above 80\u00b0C indicate degradation. Verify lubrication ports are clean and bearings have been greased per schedule. Bearing replacement on a centrifugal dryer is a $2,500\u2013$5,000 job (parts + labor); on an extruder, $5,000\u2013$15,000.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Drive Belts and Couplings<\/h3>\n\n\n\n<p>Inspect for cracks, glazing, or fraying. Measure belt tension; loose belts indicate stretching. For coupling-driven systems, check for misalignment marks or rubber wear. Belt and coupling replacements are inexpensive ($500\u2013$2,000) but indicate maintenance neglect if not done.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Where to Find Used Plastic Recycling Machines for Sale<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Auction houses<\/strong> \u2014 Ritchie Bros, IronPlanet, Hilco \u2014 large sales of decommissioned recycling plants; pricing typically lowest but no warranties<\/li>\n\n\n\n<li><strong>Used equipment dealers<\/strong> \u2014 Surplus Industrial, Plastic Machinery, regional dealers \u2014 provide some inspection and short warranty (30\u201390 days)<\/li>\n\n\n\n<li><strong>Manufacturer trade-ins<\/strong> \u2014 some manufacturers accept trade-ins of older equipment when customers upgrade; refurbished and resold with limited warranty<\/li>\n\n\n\n<li><strong>Direct from operators<\/strong> \u2014 recycling companies closing, downsizing, or upgrading; best pricing but requires self-evaluation<\/li>\n\n\n\n<li><strong>Regional industrial brokers<\/strong> \u2014 country-specific networks; helpful for crossing language barriers and customs<\/li>\n\n\n\n<li><strong>Online marketplaces<\/strong> \u2014 eBay, Alibaba, regional B2B platforms; mixed quality, requires extensive due diligence<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Refurbished vs. Used Plastic Recycling Machine<\/h2>\n\n\n\n<p>&#8220;Refurbished&#8221; is a quality tier between &#8220;used&#8221; and &#8220;new.&#8221; A properly refurbished machine has had: bearings replaced, blades resharpened or replaced, screens replaced, electrical components inspected and repaired, control panel updated, and operates within 80\u201395% of new-equipment performance. Refurbished pricing: 50\u201375% of new equipment cost, with limited warranty (3\u201312 months). For higher-value equipment (extruders, large shredders), refurbished is often the best value vs. either used or new.<\/p>\n\n\n\n<p>&#8220;Used&#8221; without refurbishment is sold as-is. Pricing 25\u201360% of new, no warranty, buyer assumes all risk. Best for buyers with technical expertise to perform their own evaluation and repairs.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Red Flags When Buying Used Plastic Recycling Machines<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Hour meter &#8220;broken&#8221; or &#8220;reset&#8221;<\/strong> \u2014 if you can&#8217;t verify operating hours, assume worst case (50,000+ hours)<\/li>\n\n\n\n<li><strong>Seller refuses material trial<\/strong> \u2014 they&#8217;re hiding capacity or output quality issues<\/li>\n\n\n\n<li><strong>&#8220;As-is&#8221; with no inspection allowed<\/strong> \u2014 never accept; either inspect or walk away<\/li>\n\n\n\n<li><strong>Manufacturer no longer in business<\/strong> \u2014 proprietary parts become unavailable; even minor repairs require custom fabrication<\/li>\n\n\n\n<li><strong>Visible signs of fire damage or water immersion<\/strong> \u2014 even if components look OK, hidden electrical damage will cause failures within months<\/li>\n\n\n\n<li><strong>Unusually low pricing<\/strong> \u2014 typically indicates seller knows about hidden problems they can&#8217;t repair economically<\/li>\n\n\n\n<li><strong>No documentation<\/strong> \u2014 no manual, no schematic, no service history; you&#8217;ll spend years learning the equipment by trial and error<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently Asked Questions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">How much can I save buying a used plastic recycling machine?<\/h3>\n\n\n\n<p>Used plastic recycling machines typically cost 40\u201370% of equivalent new equipment depending on operating hours and condition. Under 5,000 hours: 70\u201385% of new. 5,000\u201315,000 hours: 50\u201370%. Over 30,000 hours: under 35% (often near-rebuild required). Refurbished machines (rebuilt by manufacturer or dealer) cost 50\u201375% of new with limited warranty. Total savings: $50,000\u2013$300,000+ on a complete recycling line, but factor in rebuild and repair costs of $20,000\u2013$80,000 over the first 12\u201324 months.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Where can I buy used plastic recycling machine for sale?<\/h3>\n\n\n\n<p>Six channels: auction houses (Ritchie Bros, IronPlanet) for decommissioned plants; used equipment dealers (Surplus Industrial, regional dealers) with limited warranty; manufacturer trade-ins for refurbished equipment; direct from operators (closing or downsizing recyclers); regional industrial brokers; online marketplaces (eBay, Alibaba). Auction pricing is lowest; manufacturer trade-ins offer best warranty; direct-from-operator requires self-evaluation but can yield best value.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Should I buy used plastic recycling equipment as a startup?<\/h3>\n\n\n\n<p>It depends on your technical expertise. If you have in-house mechanical\/electrical capability to evaluate, repair, and maintain equipment, used can save $50,000\u2013$300,000 on capital \u2014 significant for budget-constrained startups. If you don&#8217;t have technical expertise, used equipment downtime and repair costs typically eliminate the savings within 12\u201318 months. First-time recycling startups without technical staff are typically better off with new mid-range equipment that comes with warranty and manufacturer support.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What&#8217;s the difference between used and refurbished plastic recycling machines?<\/h3>\n\n\n\n<p>&#8220;Used&#8221; is sold as-is \u2014 buyer assumes all risk, no warranty, pricing 25\u201360% of new. &#8220;Refurbished&#8221; has had bearings replaced, blades resharpened, screens replaced, electrical inspected, and operates within 80\u201395% of new performance. Refurbished pricing 50\u201375% of new with 3\u201312 month warranty. For higher-value equipment (extruders, large shredders), refurbished is often the best value vs. either used or new \u2014 particularly when refurbished by the original manufacturer.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">How do I verify operating hours on a used plastic recycling machine?<\/h3>\n\n\n\n<p>Three verification methods: (1) PLC hour meter \u2014 most reliable; require seller to display the actual reading on the HMI screen, not verbal estimate. (2) Production records \u2014 calculate cumulative hours from kg processed \u00d7 rated kg\/h. (3) Physical wear patterns \u2014 bearing condition, belt wear, paint condition, hour-stamping on serviced parts. If hours can&#8217;t be verified through at least 2 methods, negotiate 20\u201330% additional price reduction or walk away.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Is there a warranty on used plastic recycling machines?<\/h3>\n\n\n\n<p>&#8220;Used as-is&#8221; typically has no warranty. Used equipment dealers may provide 30\u201390 day limited warranty (parts only, not labor). Refurbished machines from dealers or manufacturers come with 3\u201312 month limited warranty. Manufacturer trade-ins and refurbished equipment offer the strongest used-market warranty options. For any used purchase without warranty, factor in $10,000\u2013$50,000 in budget for first-year unexpected repairs.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusion<\/h2>\n\n\n\n<p>A used plastic recycling machine can save 40\u201370% on capital cost vs. new equipment, but only if you correctly evaluate operating hours, wear part condition, electrical health, and manufacturer support. Use the 8-point evaluation checklist before purchase; verify hours via PLC counter, not verbal estimate; insist on material trial; and walk away from any seller refusing inspection. For first-time buyers without technical staff, refurbished equipment from reputable dealers (with 3\u201312 month warranty) is typically the best balance of cost savings and risk reduction.<\/p>\n\n\n\n<p>Energycle supplies new plastic recycling machines and refurbished trade-in equipment with documented service history. Our refurbished equipment includes bearing replacement, blade resharpening, screen replacement, and 6-month limited warranty. <a href=\"https:\/\/www.energycle.com\/contact-us\/\">Contact our team<\/a> for current refurbished inventory or new equipment quotes.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Related Resources<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/www.energycle.com\/what-is-a-plastic-recycling-machine\/\">Plastic Recycling Machine: Complete Guide<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.energycle.com\/plastic-recycling-machine-for-sale\/\">Plastic Recycling Machine for Sale: Buyer&#8217;s Guide &amp; Vendor Evaluation<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.energycle.com\/plastic-recycling-machine-prices-cost-drivers\/\">Plastic Recycling Machine Price Guide<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.energycle.com\/small-plastic-recycling-machine-guide\/\">Small Plastic Recycling Machine Guide for Startups<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.energycle.com\/industrial-centrifugal-dryer-buyers-guide\/\">Industrial Centrifugal Dryer Buyer&#8217;s Guide<\/a><\/li>\n<\/ul>\n\n\n\n<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"Article\",\n  \"headline\": \"Used Plastic Recycling Machine: Buyer's Guide for Second-Hand Equipment\",\n  \"description\": \"Complete buyer's guide for used plastic recycling machines. When second-hand equipment makes sense, evaluation criteria, hour ratings, wear part inspection, warranty considerations, and red flags. Save 40-70% on capital cost vs. new equipment.\",\n  \"url\": \"https:\/\/www.energycle.com\/used-plastic-recycling-machine\/\",\n  \"datePublished\": \"2026-04-29\",\n  \"dateModified\": \"2026-04-29\",\n  \"image\": \"https:\/\/www.energycle.com\/wp-content\/uploads\/used-plastic-recycling-machine.webp\",\n  \"author\": {\n    \"@type\": \"Organization\",\n    \"name\": \"Energycle\",\n    \"url\": \"https:\/\/www.energycle.com\/\"\n  },\n  \"publisher\": {\n    \"@type\": \"Organization\",\n    \"name\": \"Energycle\",\n    \"url\": \"https:\/\/www.energycle.com\/\",\n    \"logo\": {\n      \"@type\": \"ImageObject\",\n      \"url\": \"https:\/\/www.energycle.com\/wp-content\/uploads\/energycle-logo.png\"\n    }\n  }\n}\n<\/script>\n\n\n\n<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How much can I save buying a used plastic recycling machine?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Used plastic recycling machines cost 40-70% of new equipment depending on hours\/condition. Under 5,000 hours: 70-85% of new. 5,000-15,000 hours: 50-70%. Over 30,000 hours: under 35%. Refurbished machines: 50-75% of new with limited warranty. Total savings: $50,000-$300,000+ but factor $20,000-$80,000 in first-year repairs.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Where can I buy used plastic recycling machine for sale?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Six channels: auction houses (Ritchie Bros, IronPlanet) for decommissioned plants; used equipment dealers with limited warranty; manufacturer trade-ins for refurbished equipment; direct from operators (closing recyclers); regional industrial brokers; online marketplaces. Auction lowest pricing; manufacturer trade-ins best warranty; direct-from-operator best value with self-evaluation.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Should I buy used plastic recycling equipment as a startup?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Depends on technical expertise. With in-house mechanical\/electrical capability, used saves $50,000-$300,000 capital \u2014 significant for startups. Without technical expertise, used downtime and repair costs eliminate savings within 12-18 months. First-time startups without technical staff are typically better off with new mid-range equipment + warranty.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What's the difference between used and refurbished plastic recycling machines?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Used: as-is, no warranty, 25-60% of new pricing, buyer assumes all risk. Refurbished: bearings replaced, blades resharpened, screens replaced, electrical inspected, operates within 80-95% of new performance. Refurbished pricing 50-75% of new with 3-12 month warranty. For higher-value equipment, refurbished is often best value.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I verify operating hours on a used plastic recycling machine?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Three methods: (1) PLC hour meter \u2014 most reliable; display actual HMI reading. (2) Production records \u2014 kg processed \u00d7 rated kg\/h. (3) Physical wear patterns \u2014 bearing condition, belt wear, paint, hour-stamped serviced parts. If hours can't be verified through 2+ methods, negotiate 20-30% price reduction or walk away.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is there a warranty on used plastic recycling machines?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Used as-is: typically no warranty. Used equipment dealers: 30-90 day limited warranty (parts only). Refurbished from dealers\/manufacturers: 3-12 month limited warranty. Manufacturer trade-ins and refurbished equipment offer the strongest used-market warranty. Without warranty, factor $10,000-$50,000 first-year unexpected repairs.\"\n      }\n    }\n  ]\n}\n<\/script>\n\n","protected":false},"excerpt":{"rendered":"<p>Complete buyer&#8217;s guide for used plastic recycling machines. When second-hand equipment makes sense, evaluation criteria, hour ratings, wear part inspection, warranty considerations, and red flags. Save 40-70% on capital cost vs. new equipment.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3062],"tags":[],"class_list":["post-18788","post","type-post","status-publish","format-standard","hentry","category-buying-guides"],"tsf_seo":{"title":"Used Plastic Recycling Machine: Buyer's Guide for Second-Hand","description":"Used plastic recycling machine buyer's guide. When second-hand makes sense, 8-point evaluation checklist, hour ratings, wear inspection, warranty considerations.","robots":"index, follow","canonical":"https:\/\/www.energycle.com\/es\/maquina-de-reciclaje-de-plastico-usada\/","og_title":"Used Plastic Recycling Machine: Buyer's Guide for Second-Hand","og_description":"Used plastic recycling machine buyer's guide. When second-hand makes sense, 8-point evaluation checklist, hour ratings, wear inspection, warranty considerations.","og_image":""},"_links":{"self":[{"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/posts\/18788","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/comments?post=18788"}],"version-history":[{"count":1,"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/posts\/18788\/revisions"}],"predecessor-version":[{"id":18789,"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/posts\/18788\/revisions\/18789"}],"wp:attachment":[{"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/media?parent=18788"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/categories?post=18788"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.energycle.com\/es\/wp-json\/wp\/v2\/tags?post=18788"}],"curies":[{"name":"gracias","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}