{"id":14019,"date":"2025-07-05T13:30:45","date_gmt":"2025-07-05T11:30:45","guid":{"rendered":"https:\/\/www.energycle.com\/?page_id=14019"},"modified":"2026-08-24T10:33:26","modified_gmt":"2026-08-24T02:33:26","slug":"mini-distrugator-de-documente-de-birou-mic","status":"publish","type":"page","link":"https:\/\/www.energycle.com\/ro\/tocatoare-de-plastic\/mini-distrugator-de-documente-de-birou-mic\/","title":{"rendered":"Toc\u0103tor compact de mas\u0103 pentru de\u0219euri de imprimare 3D, capace \u0219i material PET m\u0103cinat"},"content":{"rendered":"\n<div id=\"erm-mdss\" class=\"energycle-hero-page\" aria-label=\"Mini desktop small shredder for plastic regrind\">\n\n    <section id=\"overview\" class=\"energycle-hero-section\">\n        <div class=\"energycle-hero-inner\">\n            <div class=\"energycle-hero-content\">\n                <p class=\"energycle-hero-eyebrow\">Desktop Plastic Shredder for Small-Batch Recycling<\/p>\n                <h1 class=\"energycle-hero-title\">Mini Desktop Shredder for 3D Print Scrap, Bottle Caps &#038; PET Regrind<\/h1>\n                <p class=\"energycle-hero-subtitle\">Convert failed prints, rigid scrap, prepared PET bottle pieces, and\n                    clean caps into 3-6 mm plastic regrind for drying, storage, and small-scale filament extrusion\n                    workflows.<\/p>\n                <div class=\"energycle-hero-actions\"><a href=\"#inquiry-form\" class=\"energycle-hero-cta\">Check Price &amp; Availability<\/a><a href=\"#specs\" class=\"energycle-hero-cta-outline\">View Specifications<\/a><\/div>\n                <nav class=\"energycle-hero-quicklinks\" aria-label=\"On-page navigation\">\n                    <a href=\"#benefits\" class=\"energycle-hero-quicklinks-item\">Benefits<\/a>\n                    <a href=\"#applications\" class=\"energycle-hero-quicklinks-item\">Applications<\/a>\n                    <a href=\"#process\" class=\"energycle-hero-quicklinks-item\">Process<\/a>\n                    <a href=\"#compare\" class=\"energycle-hero-quicklinks-item\">Why It Fits<\/a>\n                    <a href=\"#specs\" class=\"energycle-hero-quicklinks-item\">Specs<\/a>\n                    <a href=\"#gallery\" class=\"energycle-hero-quicklinks-item\">Gallery<\/a>\n                    <a href=\"#faq\" class=\"energycle-hero-quicklinks-item\">FAQ<\/a>\n                <\/nav>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"benefits\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Why This Desktop Shredder Works for Small Recycling Cells<\/h2>\n                <p class=\"energycle-section-desc\">Built for labs, makerspaces, education programs, and pilot lines that\n                    need controlled output without moving up to a full industrial shredder footprint.<\/p>\n                <p class=\"energycle-section-desc\">For larger-scale operations, explore our <a href=\"https:\/\/www.energycle.com\/plastic-shredders\/\">full range of industrial plastic shredders<\/a> covering single-shaft, double-shaft, and application-specific models.<\/p>\n            <\/div>\n            <div class=\"energycle-advantage-grid\">\n                <article class=\"energycle-advantage-card energycle-span-2\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-ruler-combined\"\n                                aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Compact Desktop Footprint<\/h3>\n                    <\/div>\n                    <p>The 650 x 300 x 780 mm machine body fits small workshops, R&amp;D benches, and compact recycling\n                        rooms where floor space is limited.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-cubes\"\n                                aria-hidden=\"true\"><\/i><\/div>\n                        <h3>3-6 mm Regrind Target<\/h3>\n                    <\/div>\n                    <p>Produces a particle size range that is easier to dry, batch, dose, and feed into small extruders\n                        or secondary screening steps.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-gears\"\n                                aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Geared 1.5 kW Drive<\/h3>\n                    <\/div>\n                    <p>Pairs a compact motor package with geared torque delivery for steady cutting on rigid parts,\n                        caps, and prepared bottle flakes.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card energycle-span-2\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-scissors\"\n                                aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Two Blade Configurations<\/h3>\n                    <\/div>\n                    <p>Select the 5 mm knife set for thicker pieces and general regrind, or the 3 mm knife set when you\n                        want finer and more consistent output.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card energycle-span-2\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-plug-circle-bolt\"\n                                aria-hidden=\"true\"><\/i><\/div>\n                        <h3>110V or 220V Options<\/h3>\n                    <\/div>\n                    <p>The electrical setup can be matched to your region so the machine is easier to deploy in\n                        classrooms, studios, and small recycling startups.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-recycle\"\n                                aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Fits Closed-Loop Material Reuse<\/h3>\n                    <\/div>\n                    <p>Ideal as the first reduction step before drying, extrusion, or lab trials when you want to reuse\n                        in-house plastic waste instead of discarding it.<\/p>\n                <\/article>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"applications\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Typical Materials and Use Cases<\/h2>\n                <p class=\"energycle-section-desc\">This compact shredder is best suited to clean, sorted plastic streams\n                    where consistent regrind matters more than maximum hourly output.<\/p>\n            <\/div>\n            <div class=\"energycle-app-bento\">\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-print\" aria-hidden=\"true\"><\/i><\/div>\n                    <h3 class=\"energycle-app-bento-title\">3D Printing Waste<\/h3>\n                    <p class=\"energycle-app-bento-desc\">Handles failed prints, support structures, purged material, and\n                        prototyping offcuts in PLA, PETG, and ABS workflows.<\/p>\n                <\/article>\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-bottle-water\" aria-hidden=\"true\"><\/i>\n                    <\/div>\n                    <h3 class=\"energycle-app-bento-title\">Prepared PET Bottles<\/h3>\n                    <p class=\"energycle-app-bento-desc\">Suitable for rinsed, dried, label-free PET bottle pieces that\n                        have been pre-cut to fit the 120 x 200 mm feed opening.<\/p>\n                <\/article>\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-cookie-bite\" aria-hidden=\"true\"><\/i>\n                    <\/div>\n                    <h3 class=\"energycle-app-bento-title\">Bottle Caps and Rigid Parts<\/h3>\n                    <p class=\"energycle-app-bento-desc\">Processes clean HDPE and PP caps plus sprues, runners, and rigid\n                        production scrap from small molding or assembly cells.<\/p>\n                <\/article>\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-flask\" aria-hidden=\"true\"><\/i><\/div>\n                    <h3 class=\"energycle-app-bento-title\">Material Trials and Education<\/h3>\n                    <p class=\"energycle-app-bento-desc\">A practical size for universities, recycling labs, and\n                        makerspaces running material characterization or demonstration projects.<\/p>\n                <\/article>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"process\" class=\"energycle-process-section\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Desktop Regrind Workflow<\/h2>\n                <p class=\"energycle-section-desc\">A straightforward small-batch process for turning sorted scrap into\n                    reusable regrind.<\/p>\n            <\/div>\n            <div class=\"energycle-process-flow-h\">\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">1<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-soap\"\n                            aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Sort and Prepare<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">Keep polymer types separated, remove labels and moisture,\n                        and cut oversize parts so they feed smoothly.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">Clean<\/span>\n                        <span class=\"tag\">Sorted<\/span>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">2<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-arrow-right-to-bracket\"\n                            aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Load the Cutting Chamber<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">Feed prepared scrap through the 120 x 200 mm opening and\n                        match the blade model to your target regrind profile.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">120 x 200 mm<\/span>\n                        <span class=\"tag\">Knife Choice<\/span>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">3<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-gears\"\n                            aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Shred into Regrind<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">The geared rotor and H13 blade set reduce material into a\n                        3-6 mm output range, depending on feedstock and knife geometry.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">0\u201320 kg\/h<\/span>\n                        <span class=\"tag\">3-6 mm<\/span>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">4<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-box-open\"\n                            aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Collect, Dry, and Reuse<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">Store regrind by material type, dry when needed, and move\n                        it to extrusion, filament making, or batch trials.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">Closed Loop<\/span>\n                        <span class=\"tag\">Reuse<\/span>\n                    <\/div>\n                <\/article>\n            <\/div>\n            <div class=\"energycle-process-flow-v\">\n                <article class=\"energycle-process-v-step\">\n                    <div class=\"v-indicator\">\n                        <span class=\"energycle-process-v-step-num\">1<\/span>\n                        <span class=\"v-line\" aria-hidden=\"true\"><\/span>\n                    <\/div>\n                    <div class=\"v-content\">\n                        <div class=\"v-step-header\">\n                            <span class=\"energycle-process-v-step-icon\"><i class=\"fa-solid fa-soap\"\n                            aria-hidden=\"true\"><\/i><\/span>\n                            <h3 class=\"energycle-process-v-step-title\">Sort and Prepare<\/h3>\n                        <\/div>\n                        <p class=\"energycle-process-v-step-desc\">Keep polymer types separated, remove labels and moisture,\n                        and cut oversize parts so they feed smoothly.<\/p>\n                        <div class=\"v-step-tags\">\n                            <span class=\"tag\">Clean<\/span>\n                            <span class=\"tag\">Sorted<\/span>\n                        <\/div>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-v-step\">\n                    <div class=\"v-indicator\">\n                        <span class=\"energycle-process-v-step-num\">2<\/span>\n                        <span class=\"v-line\" aria-hidden=\"true\"><\/span>\n                    <\/div>\n                    <div class=\"v-content\">\n                        <div class=\"v-step-header\">\n                            <span class=\"energycle-process-v-step-icon\"><i class=\"fa-solid fa-arrow-right-to-bracket\"\n                            aria-hidden=\"true\"><\/i><\/span>\n                            <h3 class=\"energycle-process-v-step-title\">Load the Cutting Chamber<\/h3>\n                        <\/div>\n                        <p class=\"energycle-process-v-step-desc\">Feed prepared scrap through the 120 x 200 mm opening and\n                        match the blade model to your target regrind profile.<\/p>\n                        <div class=\"v-step-tags\">\n                            <span class=\"tag\">120 x 200 mm<\/span>\n                            <span class=\"tag\">Knife Choice<\/span>\n                        <\/div>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-v-step\">\n                    <div class=\"v-indicator\">\n                        <span class=\"energycle-process-v-step-num\">3<\/span>\n                        <span class=\"v-line\" aria-hidden=\"true\"><\/span>\n                    <\/div>\n                    <div class=\"v-content\">\n                        <div class=\"v-step-header\">\n                            <span class=\"energycle-process-v-step-icon\"><i class=\"fa-solid fa-gears\"\n                            aria-hidden=\"true\"><\/i><\/span>\n                            <h3 class=\"energycle-process-v-step-title\">Shred into Regrind<\/h3>\n                        <\/div>\n                        <p class=\"energycle-process-v-step-desc\">The geared rotor and H13 blade set reduce material into a\n                        3-6 mm output range, depending on feedstock and knife geometry.<\/p>\n                        <div class=\"v-step-tags\">\n                            <span class=\"tag\">0\u201320 kg\/h<\/span>\n                            <span class=\"tag\">3-6 mm<\/span>\n                        <\/div>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-v-step\">\n                    <div class=\"v-indicator\">\n                        <span class=\"energycle-process-v-step-num\">4<\/span>\n                    <\/div>\n                    <div class=\"v-content\">\n                        <div class=\"v-step-header\">\n                            <span class=\"energycle-process-v-step-icon\"><i class=\"fa-solid fa-box-open\"\n                            aria-hidden=\"true\"><\/i><\/span>\n                            <h3 class=\"energycle-process-v-step-title\">Collect, Dry, and Reuse<\/h3>\n                        <\/div>\n                        <p class=\"energycle-process-v-step-desc\">Store regrind by material type, dry when needed, and move\n                        it to extrusion, filament making, or batch trials.<\/p>\n                        <div class=\"v-step-tags\">\n                            <span class=\"tag\">Closed Loop<\/span>\n                            <span class=\"tag\">Reuse<\/span>\n                        <\/div>\n                    <\/div>\n                <\/article>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"compare\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Why a Small Desktop Shredder Is the Right Scale for Lab Work<\/h2>\n                <p class=\"energycle-section-desc\">For prototyping, education, and low-volume recycling, the right\n                    machine size usually matters as much as throughput.<\/p>\n            <\/div>\n            <div class=\"energycle-compare-table-wrap\">\n                <table class=\"energycle-compare-table\">\n                    <thead>\n                        <tr>\n                            <th>Decision Factor<\/th>\n                            <th class=\"ours\">This Mini Desktop Shredder<\/th>\n                            <th>Manual Cutting<\/th>\n                            <th>Large Industrial Shredder<\/th>\n                        <\/tr>\n                    <\/thead>\n                    <tbody>\n                        <tr>\n                            <td>Footprint<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> Fits compact rooms and desktop-adjacent\n                                recycling cells<\/td>\n                            <td><span class=\"energycle-compare-cross\"><\/span> No machine footprint, but poor consistency\n                                and high labor<\/td>\n                            <td><span class=\"energycle-compare-cross\"><\/span> Often oversized for small workshops and\n                                pilot projects<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Output Control<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> Designed for a 3-6 mm small-batch regrind\n                                target<\/td>\n                            <td><span class=\"energycle-compare-cross\"><\/span> Irregular manually cut pieces<\/td>\n                            <td>High throughput, but not always practical for tiny trial lots<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Power Requirement<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> 1.5 kW with 110V or 220V options<\/td>\n                            <td>Low power, high operator effort<\/td>\n                            <td><span class=\"energycle-compare-cross\"><\/span> Usually requires heavier infrastructure\n                            <\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Material Trials<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> Practical for testing blade setups and\n                                material recipes in small lots<\/td>\n                            <td><span class=\"energycle-compare-cross\"><\/span> Difficult to reproduce results from batch\n                                to batch<\/td>\n                            <td>Often uneconomical for short trial runs<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Downstream Pairing<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> Easy to match with benchtop drying and\n                                filament extrusion equipment<\/td>\n                            <td><span class=\"energycle-compare-cross\"><\/span> Feed shape is inconsistent for extrusion\n                            <\/td>\n                            <td>May create more output than a lab-scale downstream system can absorb<\/td>\n                        <\/tr>\n                    <\/tbody>\n                <\/table>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"specs\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Technical Specifications<\/h2>\n                <p class=\"energycle-section-desc\">Core machine data for confirming fit, utilities, and the right blade\n                    package.<\/p>\n            <\/div>\n            <div class=\"energycle-specs-table-wrap\">\n                <table class=\"energycle-specs-table\">\n                    <thead>\n                        <tr>\n                            <th>Parameter<\/th>\n                            <th>Specification<\/th>\n                        <\/tr>\n                    <\/thead>\n                    <tbody>\n                        <tr>\n                            <td>Feed Opening<\/td>\n                            <td>120 x 200 mm<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Target Regrind Output<\/td>\n                            <td>3-6 mm, material dependent<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Typical Throughput<\/td>\n                            <td>0\u201320 kg\/h, depending on material<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Blade Model A<\/td>\n                            <td>22 rotating blades + 22 fixed blades, 5 mm width<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Blade Model B<\/td>\n                            <td>36 rotating blades + 36 fixed blades, 3 mm thickness<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Rotating Blade Diameter<\/td>\n                            <td>100 mm<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Blade Material<\/td>\n                            <td>H13 industrial tool steel<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Motor Power<\/td>\n                            <td>1.5 kW with gearbox<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Voltage<\/td>\n                            <td>Customizable, 110V or 220V options<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Machine Weight<\/td>\n                            <td>101 kg<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Overall Dimensions<\/td>\n                            <td>650 x 300 x 780 mm<\/td>\n                        <\/tr>\n                    <\/tbody>\n                <\/table>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"gallery\" class=\"energycle-gallery-section\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Machine Gallery<\/h2>\n                <p class=\"energycle-section-desc\">See the compact machine body and the blade configuration used for\n                    controlled small-batch shredding.<\/p>\n            <\/div>\n            <div class=\"energycle-gallery-grid\">\n                <div class=\"energycle-gallery-item\">\n                    <img src=\"https:\/\/www.energycle.com\/wp-content\/uploads\/2025\/07\/mini-desktop-shredder-blades.webp\"\n                        alt=\"Mini desktop shredder blade set for plastic regrind production\" width=\"1024\" height=\"1024\"\n                        loading=\"lazy\" decoding=\"async\" \/>\n                <\/div>\n                <div class=\"energycle-gallery-item\">\n                    <img src=\"https:\/\/recycling.imgix.net\/energycle\/shredder\/mini%20desktop%20small%20shredder%20blades.webp?auto=format,compress\"\n                        alt=\"H13 blade assembly for mini desktop small shredder\" width=\"1200\" height=\"1200\"\n                        loading=\"lazy\" decoding=\"async\" \/>\n                <\/div>\n                <div class=\"energycle-gallery-item\">\n                    <img src=\"https:\/\/recycling.imgix.net\/energycle\/shredder\/mini%20desktop%20small%20shredder.webp?auto=format,compress\"\n                        alt=\"Mini desktop small shredder front view for plastic recycling\" width=\"1200\" height=\"1200\"\n                        loading=\"lazy\" decoding=\"async\" \/>\n                <\/div>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"video\" class=\"energycle-video-section\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Watch the Shredder in Operation<\/h2>\n                <p class=\"energycle-section-desc\">Video preview of the compact cutting chamber and regrind generation\n                    workflow.<\/p>\n            <\/div>\n            <div class=\"energycle-video-container\" data-video-id=\"iKx7V8CkzP4\"\n                data-video-title=\"Mini desktop small shredder operation demo\">\n                <button type=\"button\" class=\"energycle-video-trigger\"\n                    aria-label=\"Play mini desktop small shredder video\">\n                    <img src=\"https:\/\/i.ytimg.com\/vi\/iKx7V8CkzP4\/hq720.jpg\"\n                        alt=\"Mini desktop small shredder video cover\" width=\"1280\" height=\"720\" loading=\"lazy\"\n                        decoding=\"async\" \/>\n                    <span class=\"play-button\" aria-hidden=\"true\"><\/span>\n                <\/button>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"related\" class=\"energycle-template-section\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Related Equipment for a Closed-Loop Workflow<\/h2>\n                <p class=\"energycle-section-desc\">Pair this shredder with drying, classification, or extrusion equipment\n                    to complete a compact plastic recycling setup.<\/p>\n            <\/div>\n            <div class=\"energycle-product-grid\">\n                <a href=\"https:\/\/www.energycle.com\/3d-filament-extruder-for-recycled-polymer-feedstock\/\"\n                    class=\"energycle-product-card energycle-product-col-span-1\" target=\"_blank\"\n                    rel=\"noopener noreferrer\">\n                    <h3>3D Filament Extruder<\/h3>\n                    <p>Convert sorted regrind into recycled filament for prototyping, teaching, or low-volume material\n                        reuse.<\/p>\n                <\/a>\n                <a href=\"https:\/\/www.energycle.com\/vertical-mixing-dryer\/\"\n                    class=\"energycle-product-card energycle-product-col-span-1\" target=\"_blank\"\n                    rel=\"noopener noreferrer\">\n                    <h3>Vertical Mixing Dryer<\/h3>\n                    <p>Dry and homogenize regrind before extrusion when moisture control and batch consistency are\n                        critical.<\/p>\n                <\/a>\n                <a href=\"https:\/\/www.energycle.com\/assistive-system\/zig-zag-air-classifier\/\"\n                    class=\"energycle-product-card energycle-product-col-span-1\" target=\"_blank\"\n                    rel=\"noopener noreferrer\">\n                    <h3>Zig Zag Air Classifier<\/h3>\n                    <p>Remove lightweight dust, label fragments, and fines from regrind when higher purity is required\n                        downstream.<\/p>\n                <\/a>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    \n<section id=\"warranty-support\" class=\"energycle-warranty-section\">\n  <div class=\"energycle-wrapper\">\n    <div class=\"energycle-warranty-layout\">\n      <div class=\"energycle-warranty-header\">\n        <span class=\"energycle-warranty-eyebrow\">Warranty and Support<\/span>\n        <h2 class=\"energycle-warranty-title\">Reliable Support Throughout the Equipment Lifecycle<\/h2>\n        <p class=\"energycle-warranty-desc\">Warranty, commissioning, spare-parts, and service arrangements are confirmed for each project based on the selected configuration, feed material, installation conditions, and project requirements.<\/p>\n      <\/div>\n      <div class=\"energycle-warranty-grid\">\n        <article class=\"energycle-warranty-card\">\n          <div>\n            <h3 class=\"energycle-warranty-card-title\">Project-Specific Warranty Terms<\/h3>\n            <p class=\"energycle-warranty-card-text\">Warranty coverage, duration, covered components, and exclusions are confirmed in the project quotation or contract based on the selected configuration, feed material, and operating conditions.<\/p>\n          <\/div>\n          <span class=\"energycle-warranty-badge\">Confirmed per project<\/span>\n        <\/article>\n        <article class=\"energycle-warranty-card\">\n          <div>\n            <h3 class=\"energycle-warranty-card-title\">Installation Guidance<\/h3>\n            <p class=\"energycle-warranty-card-text\">Available layout, utility, installation, commissioning, and on-site guidance are confirmed according to the equipment configuration, installation location, feed material, and project scope.<\/p>\n          <\/div>\n          <span class=\"energycle-warranty-badge\">Confirmed per project<\/span>\n        <\/article>\n        <article class=\"energycle-warranty-card\">\n          <div>\n            <h3 class=\"energycle-warranty-card-title\">Spare Parts Supply<\/h3>\n            <p class=\"energycle-warranty-card-text\">Recommended wear parts, initial spare-parts packages, supply scope, and availability are confirmed according to the selected configuration, feed material, operating plan, and project requirements.<\/p>\n          <\/div>\n          <span class=\"energycle-warranty-badge\">Confirmed per project<\/span>\n        <\/article>\n        <article class=\"energycle-warranty-card\">\n          <div>\n            <h3 class=\"energycle-warranty-card-title\">Technical Assistance<\/h3>\n            <p class=\"energycle-warranty-card-text\">Remote or on-site assistance, response arrangements, and service terms are confirmed according to the equipment configuration, project location, feed material, and agreed service scope.<\/p>\n          <\/div>\n          <span class=\"energycle-warranty-badge\">Confirmed per project<\/span>\n        <\/article>\n      <\/div>\n    <\/div>\n  <\/div>\n<\/section>\n\n<section id=\"faq\" class=\"energycle-faq-section\">\n        <div class=\"energycle-wrapper energycle-faq-container\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Frequently Asked Questions<\/h2>\n                <p class=\"energycle-section-desc\">Key answers for buyers comparing small plastic shredders for lab and\n                    studio use.<\/p>\n            <\/div>\n            <div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"mdss-faq-t-1\"\n                        aria-controls=\"mdss-faq-c-1\">\n                        <h3>What plastics can this mini desktop shredder process?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"mdss-faq-c-1\" role=\"region\"\n                        aria-labelledby=\"mdss-faq-t-1\">\n                        <p>Typical inputs include failed 3D prints, bottle caps, sprues, runners, rigid containers, and\n                            prepared PET bottle pieces. Material should be clean, dry, and sorted by polymer for the\n                            most stable results.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"mdss-faq-t-2\"\n                        aria-controls=\"mdss-faq-c-2\">\n                        <h3>What output size can I expect?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"mdss-faq-c-2\" role=\"region\"\n                        aria-labelledby=\"mdss-faq-t-2\">\n                        <p>The target output is 3-6 mm, but the exact regrind profile depends on plastic type, wall\n                            thickness, blade model, and feed preparation.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"mdss-faq-t-3\"\n                        aria-controls=\"mdss-faq-c-3\">\n                        <h3>How do I choose between the 5 mm and 3 mm blade models?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"mdss-faq-c-3\" role=\"region\"\n                        aria-labelledby=\"mdss-faq-t-3\">\n                        <p>The 5 mm configuration is commonly chosen for thicker or less uniform rigid pieces, while the\n                            3 mm configuration is preferred when finer, more consistent regrind is needed for feeding a\n                            small extruder.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"mdss-faq-t-4\"\n                        aria-controls=\"mdss-faq-c-4\">\n                        <h3>Is 110V available for schools, labs, or home workshops?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"mdss-faq-c-4\" role=\"region\"\n                        aria-labelledby=\"mdss-faq-t-4\">\n                        <p>Yes. The machine can be supplied in 110V or 220V versions. Share your country, plug type, and\n                            installation environment when requesting a quotation.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"mdss-faq-t-5\"\n                        aria-controls=\"mdss-faq-c-5\">\n                        <h3>Can this shredder feed a filament extrusion workflow directly?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"mdss-faq-c-5\" role=\"region\"\n                        aria-labelledby=\"mdss-faq-t-5\">\n                        <p>It is well suited as the first size-reduction step. Many users still add drying, screening,\n                            or mixing before extrusion to improve consistency, especially for hygroscopic or mixed-shape\n                            scrap.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\"><button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"mdss-faq-t-6\" aria-controls=\"mdss-faq-c-6\"><h3>How much does a desktop plastic shredder cost?<\/h3><i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i><\/button><div class=\"energycle-faq-accordion-content\" id=\"mdss-faq-c-6\" role=\"region\" aria-labelledby=\"mdss-faq-t-6\"><p>Commercial terms\u2014including price, availability, delivery, warranty, installation and commissioning support, spare-parts scope, and service\u2014are confirmed for each project based on the selected configuration, feed material, and project requirements. Share the material, target throughput, voltage, installation location, and intended use for a project-specific quotation.<\/p><\/div><\/div>\n                <div class=\"energycle-faq-accordion-item\"><button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"mdss-faq-t-7\" aria-controls=\"mdss-faq-c-7\"><h3>Can this mini shredder recycle PET bottles at home?<\/h3><i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i><\/button><div class=\"energycle-faq-accordion-content\" id=\"mdss-faq-c-7\" role=\"region\" aria-labelledby=\"mdss-faq-t-7\"><p>Yes, with preparation. Remove labels and caps, and cut bottles into strips that fit the feed opening. The shredder produces 3-6mm flakes suitable for <a href=\"https:\/\/www.energycle.com\/3d-filament-extruder-for-recycled-polymer-feedstock\/\">filament extrusion<\/a> or craft projects. For industrial-scale PET bottle recycling, see our <a href=\"https:\/\/www.energycle.com\/pet-bottle-recycling-system\/\">PET bottle recycling system<\/a>.<\/p><\/div><\/div>\n                <div class=\"energycle-faq-accordion-item\"><button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"mdss-faq-t-8\" aria-controls=\"mdss-faq-c-8\"><h3>What is the difference between a desktop shredder and an industrial granulator?<\/h3><i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i><\/button><div class=\"energycle-faq-accordion-content\" id=\"mdss-faq-c-8\" role=\"region\" aria-labelledby=\"mdss-faq-t-8\"><p>A desktop shredder processes 0\u201320 kg\/hour, depending on the material, and is designed for labs, classrooms, and small workshops. An <a href=\"https:\/\/www.energycle.com\/plastic-granulators\/\">industrial granulator<\/a> is built for continuous production at higher throughput. The desktop shredder is ideal for prototyping, education, and closed-loop 3D printing workflows.<\/p><\/div><\/div>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"inquiry-form\" class=\"energycle-cta-section\">\n        <div class=\"energycle-wrapper energycle-cta-inner\">\n            <div class=\"energycle-cta-content\">\n                <h2 class=\"energycle-cta-title\">Request Pricing for the Mini Desktop Small Shredder<\/h2>\n                <p class=\"energycle-cta-subtitle\">Tell us your material type, expected batch size, preferred blade\n                    model, and local voltage. We will confirm the right configuration and quote accordingly.<\/p>\n            <\/div>\n            <div class=\"energycle-cta-form\">\n                <div class='fluentform ff-default fluentform_wrapper_1 ffs_default_wrap'><form data-form_id=\"1\" id=\"fluentform_1\" class=\"frm-fluent-form fluent_form_1 ff-el-form-top ff_form_instance_1_1 ff-form-loading ffs_default\" data-form_instance=\"ff_form_instance_1_1\" method=\"POST\" data-turnstile_key=\"0x4AAAAAAC2lVxjKblyRtkwL\" ><fieldset  style=\"border: none!important;margin: 0!important;padding: 0!important;background-color: transparent!important;box-shadow: none!important;outline: none!important; min-inline-size: 100%;\">\n                    <legend class=\"ff_screen_reader_title\" style=\"display: block; margin: 0!important;padding: 0!important;height: 0!important;text-indent: -999999px;width: 0!important;overflow:hidden;\">Contact Form<\/legend><input type='hidden' name='__fluent_form_embded_post_id' value='14019' \/><input type=\"hidden\" id=\"_fluentform_1_fluentformnonce\" name=\"_fluentform_1_fluentformnonce\" value=\"688fe18db0\" \/><input type=\"hidden\" name=\"_wp_http_referer\" value=\"\/ro\/wp-json\/wp\/v2\/pages\/14019\" \/><div data-type=\"name-element\" data-name=\"names\" class=\" ff-field_container ff-name-field-wrapper\" ><div class='ff-t-container'><div class='ff-t-cell '><div class='ff-el-group'><div class=\"ff-el-input--label asterisk-right\"><label for='ff_1_names_first_name_' id='label_ff_1_names_first_name_' >First Name<\/label><\/div><div class='ff-el-input--content'><input type=\"text\" name=\"names[first_name]\" id=\"ff_1_names_first_name_\" class=\"ff-el-form-control\" placeholder=\"First Name\" aria-invalid=\"false\" aria-required=false><\/div><\/div><\/div><div class='ff-t-cell '><div class='ff-el-group'><div class=\"ff-el-input--label asterisk-right\"><label for='ff_1_names_last_name_' id='label_ff_1_names_last_name_' >Last Name<\/label><\/div><div class='ff-el-input--content'><input type=\"text\" name=\"names[last_name]\" id=\"ff_1_names_last_name_\" class=\"ff-el-form-control\" placeholder=\"Last Name\" aria-invalid=\"false\" aria-required=false><\/div><\/div><\/div><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_1_input_text_1' id='label_ff_1_input_text_1' aria-label=\"Company name\">Company name<\/label><\/div><div class='ff-el-input--content'><input type=\"text\" name=\"input_text_1\" class=\"ff-el-form-control\" placeholder=\"Company name\" data-name=\"input_text_1\" id=\"ff_1_input_text_1\"  aria-invalid=\"false\" aria-required=true><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_1_email' id='label_ff_1_email' aria-label=\"Email\">Email<\/label><\/div><div class='ff-el-input--content'><input type=\"email\" name=\"email\" id=\"ff_1_email\" class=\"ff-el-form-control\" placeholder=\"Email Address\" data-name=\"email\"  aria-invalid=\"false\" aria-required=true><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_1_subject' id='label_ff_1_subject' aria-label=\"Subject\">Subject<\/label><\/div><div class='ff-el-input--content'><input type=\"text\" name=\"subject\" class=\"ff-el-form-control\" placeholder=\"Subject\" data-name=\"subject\" id=\"ff_1_subject\"  aria-invalid=\"false\" aria-required=true><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_1_message' id='label_ff_1_message' aria-label=\"Your Message\">Your Message<\/label><\/div><div class='ff-el-input--content'><textarea aria-required=\"true\" aria-labelledby=\"label_ff_1_message\" name=\"message\" id=\"ff_1_message\" class=\"ff-el-form-control\" placeholder=\"Your Message\" rows=\"4\" cols=\"2\" data-name=\"message\" ><\/textarea><\/div><\/div><div class='ff-el-group ' ><div class='ff-el-input--content'><div data-fluent_id='1' name='cf-turnstile-response'><div\n\t\tdata-sitekey='0x4AAAAAAC2lVxjKblyRtkwL'\n\t\tdata-theme='auto'\n\t\tid='fluentform-turnstile-1-1'\n\t\tclass='ff-el-turnstile cf-turnstile'\n\t\tdata-appearance='always'><\/div><\/div><\/div><\/div><div class='ff-el-group ff-text-left ff_submit_btn_wrapper'><button type=\"submit\" class=\"ff-btn ff-btn-submit ff-btn-md ff_btn_style\"  aria-label=\"Submit Form\">Submit Form<\/button><\/div><\/fieldset><\/form><div id='fluentform_1_errors' class='ff-errors-in-stack ff_form_instance_1_1 ff-form-loading_errors ff_form_instance_1_1_errors'><\/div><\/div>            <script type=\"text\/javascript\">\n                window.fluent_form_ff_form_instance_1_1 = {\"id\":\"1\",\"ajaxUrl\":\"https:\\\/\\\/www.energycle.com\\\/wp-admin\\\/admin-ajax.php\",\"settings\":{\"layout\":{\"labelPlacement\":\"top\",\"helpMessagePlacement\":\"with_label\",\"errorMessagePlacement\":\"inline\",\"cssClassName\":\"\",\"asteriskPlacement\":\"asterisk-right\"},\"restrictions\":{\"denyEmptySubmission\":{\"enabled\":false}}},\"form_instance\":\"ff_form_instance_1_1\",\"form_id_selector\":\"fluentform_1\",\"rules\":{\"names[first_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"names[middle_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"names[last_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"input_text_1\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global_message\":\"This field is required\",\"global\":true}},\"email\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"},\"email\":{\"value\":true,\"message\":\"This field must contain a valid email\",\"global\":false,\"global_message\":\"This field must contain a valid email\"}},\"subject\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"message\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"cf-turnstile-response\":[]},\"debounce_time\":300,\"file_upload_settings\":[]};\n                            <\/script>\n            \n            <\/div>\n        <\/div>\n    <\/section>\n\n<\/div>\n\n<script>\n    (function () {\n        var page = document.getElementById('erm-mdss');\n        if (!page) return;\n\n        page.querySelectorAll('.energycle-video-container').forEach(function (wrap) {\n            var btn = wrap.querySelector('.energycle-video-trigger');\n            if (!btn) return;\n            btn.addEventListener('click', function () {\n                var id = wrap.getAttribute('data-video-id');\n                if (!id) return;\n                var title = wrap.getAttribute('data-video-title') || 'YouTube video';\n                var iframe = document.createElement('iframe');\n                iframe.setAttribute('title', title);\n                iframe.setAttribute('allow', 'accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share');\n                iframe.setAttribute('allowfullscreen', '');\n                iframe.setAttribute('loading', 'lazy');\n                iframe.src = 'https:\/\/www.youtube.com\/embed\/' + id + '?autoplay=1&rel=0&modestbranding=1&playsinline=1';\n                wrap.replaceChildren(iframe);\n            });\n        });\n\n        var faqItems = page.querySelectorAll('.energycle-faq-accordion-item');\n        faqItems.forEach(function (item) {\n            var panel = item.querySelector('.energycle-faq-accordion-content');\n            if (panel) panel.setAttribute('aria-hidden', 'true');\n            var header = item.querySelector('.energycle-faq-accordion-header');\n            var icon = item.querySelector('.energycle-faq-accordion-icon');\n            if (!header || !panel || !icon) return;\n            header.addEventListener('click', function () {\n                var wasOpen = item.classList.contains('active');\n                faqItems.forEach(function (entry) {\n                    entry.classList.remove('active');\n                    var entryHeader = entry.querySelector('.energycle-faq-accordion-header');\n                    var entryPanel = entry.querySelector('.energycle-faq-accordion-content');\n                    var entryIcon = entry.querySelector('.energycle-faq-accordion-icon');\n                    if (entryHeader) entryHeader.setAttribute('aria-expanded', 'false');\n                    if (entryPanel) {\n                        entryPanel.setAttribute('aria-hidden', 'true');\n                        entryPanel.style.maxHeight = null;\n                    }\n                    if (entryIcon) {\n                        entryIcon.classList.remove('fa-minus');\n                        entryIcon.classList.add('fa-plus');\n                    }\n                });\n                if (!wasOpen) {\n                    item.classList.add('active');\n                    header.setAttribute('aria-expanded', 'true');\n                    panel.setAttribute('aria-hidden', 'false');\n                    panel.style.maxHeight = panel.scrollHeight + 'px';\n                    icon.classList.remove('fa-plus');\n                    icon.classList.add('fa-minus');\n                }\n            });\n        });\n    }());\n<\/script>\n\n<script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What plastics can this mini desktop shredder process?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Typical inputs include failed 3D prints, bottle caps, sprues, runners, rigid containers, and prepared PET bottle pieces. Material should be clean, dry, and sorted by polymer for the most stable results.\"}},{\"@type\":\"Question\",\"name\":\"What output size can I expect?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The target output is 3-6 mm, but the exact regrind profile depends on plastic type, wall thickness, blade model, and feed preparation.\"}},{\"@type\":\"Question\",\"name\":\"How do I choose between the 5 mm and 3 mm blade models?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 5 mm configuration is commonly chosen for thicker or less uniform rigid pieces, while the 3 mm configuration is preferred when finer, more consistent regrind is needed for feeding a small extruder.\"}},{\"@type\":\"Question\",\"name\":\"Is 110V available for schools, labs, or home workshops?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The machine can be supplied in 110V or 220V versions. Share your country, plug type, and installation environment when requesting a quotation.\"}},{\"@type\":\"Question\",\"name\":\"Can this shredder feed a filament extrusion workflow directly?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"It is well suited as the first size-reduction step. Many users still add drying, screening, or mixing before extrusion to improve consistency, especially for hygroscopic or mixed-shape scrap.\"}},{\"@type\":\"Question\",\"name\":\"How much does a desktop plastic shredder cost?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Commercial terms\u2014including price, availability, delivery, warranty, installation and commissioning support, spare-parts scope, and service\u2014are confirmed for each project based on the selected configuration, feed material, and project requirements. Share the material, target throughput, voltage, installation location, and intended use for a project-specific quotation.\"}},{\"@type\":\"Question\",\"name\":\"Can this mini shredder recycle PET bottles at home?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes, with preparation. Remove labels and caps, and cut bottles into strips that fit the feed opening. The shredder produces 3-6mm flakes suitable for filament extrusion or craft projects. For industrial-scale PET bottle recycling, see our PET bottle recycling system .\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between a desktop shredder and an industrial granulator?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A desktop shredder processes 0\u201320 kg\/hour, depending on the material, and is designed for labs, classrooms, and small workshops. An industrial granulator is built for continuous production at higher throughput. The desktop shredder is ideal for prototyping, education, and closed-loop 3D printing workflows.\"}}]},{\"@type\":\"VideoObject\",\"name\":\"Mini Desktop Small Shredder Operation Demo\",\"description\":\"Watch a compact desktop plastic shredder process small-batch scrap into reusable 3-6 mm plastic regrind.\",\"thumbnailUrl\":[\"https:\/\/i.ytimg.com\/vi\/iKx7V8CkzP4\/hq720.jpg\"],\"embedUrl\":\"https:\/\/www.youtube.com\/embed\/iKx7V8CkzP4\",\"contentUrl\":\"https:\/\/www.youtube.com\/watch?v=iKx7V8CkzP4\",\"uploadDate\":\"2025-07-05T11:30:45+00:00\",\"duration\":\"PT1M30S\"}]}<\/script>\n\n\n\n\n\n\n\n","protected":false},"excerpt":{"rendered":"<p>Shredder de Plastic Desktop pentru Reciclare \u00een Mic\u0103 Scaal\u0103 Shredder Desktop pentru De\u0219euri de 3D Print, Capete de Sticle \u0219i Reciclare PET Mini Convert\u0103 imprimeurile e\u0219uate, de\u0219eurile rigide, buc\u0103\u021bile preg\u0103tite ale sticlelor de PET \u0219i capslele curate \u00een regrind plastic de 3-6 mm pentru uscare, depozitare \u0219i fluxuri de extrudare la scar\u0103 mic\u0103. Verific\u0103 Pre\u021bul \u0219i DisponibilitateaVizualizeaz\u0103 Specifica\u021biile Beneficii Aplica\u021bii Procesul De ce se potrive\u0219te Specifica\u021biile \u0219i \u2026 <a href=\"https:\/\/www.energycle.com\/ro\/tocatoare-de-plastic\/mini-distrugator-de-documente-de-birou-mic\/\" class=\"more-link\">Continu\u0103 s\u0103 cite\u0219ti <span class=\"screen-reader-text\">Toc\u0103tor compact de mas\u0103 pentru de\u0219euri de imprimare 3D, capace \u0219i material PET m\u0103cinat<\/span><\/a><\/p>","protected":false},"author":1,"featured_media":17061,"parent":7061,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-14019","page","type-page","status-publish","has-post-thumbnail","hentry"],"_links":{"self":[{"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/pages\/14019","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/comments?post=14019"}],"version-history":[{"count":9,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/pages\/14019\/revisions"}],"predecessor-version":[{"id":20892,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/pages\/14019\/revisions\/20892"}],"up":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/pages\/7061"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/media\/17061"}],"wp:attachment":[{"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/media?parent=14019"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}