{"id":11643,"date":"2024-11-21T10:15:29","date_gmt":"2024-11-21T09:15:29","guid":{"rendered":"https:\/\/www.energycle.com\/?p=11643"},"modified":"2026-03-24T04:38:28","modified_gmt":"2026-03-24T03:38:28","slug":"sistem-de-extrudare-cu-surub-dublu","status":"publish","type":"post","link":"https:\/\/www.energycle.com\/ro\/sistem-de-extrudare-cu-surub-dublu\/","title":{"rendered":"Sistem de extrudare cu dou\u0103 \u0219uruburi"},"content":{"rendered":"\n<div id=\"erm-tses\" class=\"energycle-hero-page\" aria-label=\"Twin-screw extruder system\">\n\n    <section id=\"overview\" class=\"energycle-hero-section\">\n        <div class=\"energycle-hero-inner\">\n            <div class=\"energycle-hero-content\">\n                <p class=\"energycle-hero-eyebrow\">General Twin-Screw Extrusion Platform<\/p>\n                <h1 class=\"energycle-hero-title\">Twin-Screw Extruder System<\/h1>\n                <p class=\"energycle-hero-subtitle\">A modular co-rotating twin-screw extruder system for stable melting, conveying, devolatilization, and continuous extrusion across profile, pipe, sheet, and general polymer processing projects. It is intended for dependable extrusion duty and flexible configuration rather than a fully integrated pelletizing line by default.<\/p>\n                <div>\n                    <a href=\"#inquiry-form\" class=\"energycle-hero-cta\">Request a Configuration Proposal<\/a>\n                    <a href=\"#specs\" class=\"energycle-hero-cta-outline\">View Core Specs<\/a>\n                <\/div>\n                <nav class=\"energycle-hero-quicklinks\" aria-label=\"On-page navigation\">\n                    <a href=\"#benefits\" class=\"energycle-hero-quicklinks-item\">Benefits<\/a>\n                    <a href=\"#applications\" class=\"energycle-hero-quicklinks-item\">Applications<\/a>\n                    <a href=\"#process\" class=\"energycle-hero-quicklinks-item\">Process<\/a>\n                    <a href=\"#compare\" class=\"energycle-hero-quicklinks-item\">Compare<\/a>\n                    <a href=\"#specs\" class=\"energycle-hero-quicklinks-item\">Specs<\/a>\n                    <a href=\"#gallery\" class=\"energycle-hero-quicklinks-item\">Gallery<\/a>\n                    <a href=\"#video\" class=\"energycle-hero-quicklinks-item\">Video<\/a>\n                    <a href=\"#related\" class=\"energycle-hero-quicklinks-item\">Related<\/a>\n                    <a href=\"#faq\" class=\"energycle-hero-quicklinks-item\">FAQ<\/a>\n                <\/nav>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"benefits\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Why Choose a Modular Twin-Screw Extruder System<\/h2>\n                <p class=\"energycle-section-desc\">This platform is aimed at reliable continuous extrusion with flexible screw and barrel configuration. It is the right fit when you need broader process control than a basic extruder, but not necessarily a dedicated pelletizing package.<\/p>\n            <\/div>\n            <div class=\"energycle-advantage-grid\">\n                <article class=\"energycle-advantage-card energycle-span-2\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-cubes\" aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Modular Screw and Barrel Layout<\/h3>\n                    <\/div>\n                    <p>The building-block design lets the system be adjusted around your polymer, product geometry, venting need, and downstream line layout.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-temperature-three-quarters\" aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Accurate Temperature Control<\/h3>\n                    <\/div>\n                    <p>Independent heating zones help maintain stable melt viscosity and improve day-to-day production consistency.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-gear\" aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Multiple Gearbox and Torque Options<\/h3>\n                    <\/div>\n                    <p>Different torque series and drive arrangements allow the line to be sized around throughput, resin type, and product duty.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card energycle-span-2\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-broom-ball\" aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Self-Cleaning Screw Interaction<\/h3>\n                    <\/div>\n                    <p>Co-rotating intermeshing screws help reduce dead zones and residue accumulation, which supports more stable long-run extrusion.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card energycle-span-2\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-arrow-up-wide-short\" aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Flexible Feeding and Venting Configurations<\/h3>\n                    <\/div>\n                    <p>Main feed, side feed, venting, and vacuum sections can be combined according to the polymer system and downstream product target.<\/p>\n                <\/article>\n                <article class=\"energycle-advantage-card\">\n                    <div class=\"energycle-advantage-header\">\n                        <div class=\"energycle-advantage-header-icon\"><i class=\"fa-solid fa-screwdriver-wrench\" aria-hidden=\"true\"><\/i><\/div>\n                        <h3>Maintenance-Friendly Service Layout<\/h3>\n                    <\/div>\n                    <p>Replaceable wear sections and modular service access help reduce downtime and simplify long-term maintenance planning.<\/p>\n                <\/article>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"applications\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Typical Applications for This Extruder System<\/h2>\n                <p class=\"energycle-section-desc\">This machine is best understood as a configurable extrusion platform rather than only a pelletizing line.<\/p>\n            <\/div>\n            <div class=\"energycle-app-bento\">\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-border-all\" aria-hidden=\"true\"><\/i><\/div>\n                    <h3 class=\"energycle-app-bento-title\">Profiles and WPC Products<\/h3>\n                    <p class=\"energycle-app-bento-desc\">Suitable for profile and WPC extrusion projects that need stable melt delivery and matched downstream equipment.<\/p>\n                <\/article>\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-pipe\" aria-hidden=\"true\"><\/i><\/div>\n                    <h3 class=\"energycle-app-bento-title\">Pipe Extrusion<\/h3>\n                    <p class=\"energycle-app-bento-desc\">Supports pipe lines that depend on stable output, controlled melt temperature, and compatible calibration or haul-off sections.<\/p>\n                <\/article>\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-sheet-plastic\" aria-hidden=\"true\"><\/i><\/div>\n                    <h3 class=\"energycle-app-bento-title\">Sheet and Board Extrusion<\/h3>\n                    <p class=\"energycle-app-bento-desc\">Works on sheet and board applications where thickness consistency and steady melt flow matter.<\/p>\n                <\/article>\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-bolt\" aria-hidden=\"true\"><\/i><\/div>\n                    <h3 class=\"energycle-app-bento-title\">Cable Material Extrusion<\/h3>\n                    <p class=\"energycle-app-bento-desc\">Can be configured for cable compound extrusion with appropriate feeding, temperature zoning, and downstream matching.<\/p>\n                <\/article>\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-flask-vial\" aria-hidden=\"true\"><\/i><\/div>\n                    <h3 class=\"energycle-app-bento-title\">Specialty Polymer Processing<\/h3>\n                    <p class=\"energycle-app-bento-desc\">A good base when the project needs custom venting, dosing, and screw-section selection around a specific polymer job.<\/p>\n                <\/article>\n                <article class=\"energycle-app-bento-card\">\n                    <div class=\"energycle-app-bento-icon\"><i class=\"fa-solid fa-industry\" aria-hidden=\"true\"><\/i><\/div>\n                    <h3 class=\"energycle-app-bento-title\">Complete Extrusion Lines<\/h3>\n                    <p class=\"energycle-app-bento-desc\">Can be integrated with die heads, cooling tables, tanks, haul-off units, and cutters to form a full production line.<\/p>\n                <\/article>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"process\" class=\"energycle-process-section\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">How the Twin-Screw Extruder System Runs<\/h2>\n                <p class=\"energycle-section-desc\">The process flow changes by product type, but the core extrusion logic remains broadly consistent across line configurations.<\/p>\n            <\/div>\n            <div class=\"energycle-process-flow-h\">\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">1<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-arrow-up-wide-short\" aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Feed the Resin or Compound<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">Material enters through the main hopper, and side feeding can be added when the process requires multi-point dosing.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">Main Feed<\/span>\n                        <span class=\"tag\">Side Feed<\/span>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">2<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-fire-flame-curved\" aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Melt and Convey<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">The twin screws plasticize the material while maintaining controlled melt development and stable output pressure.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">Twin-Screw Melt<\/span>\n                        <span class=\"tag\">Stable Pressure<\/span>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">3<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-wind\" aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Vent if Needed<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">Optional venting and vacuum zones remove moisture and volatiles where the process requires cleaner melt conditions.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">Venting<\/span>\n                        <span class=\"tag\">Vacuum Option<\/span>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">4<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-shapes\" aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Shape Through the Die<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">The melt passes through a matched die head for profile, pipe, sheet, or other extrusion targets.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">Die Forming<\/span>\n                        <span class=\"tag\">Product Geometry<\/span>\n                    <\/div>\n                <\/article>\n                <article class=\"energycle-process-h-step\">\n                    <div class=\"energycle-process-h-step-num\">5<\/div>\n                    <span class=\"energycle-process-h-step-icon\"><i class=\"fa-solid fa-ruler-combined\" aria-hidden=\"true\"><\/i><\/span>\n                    <h3 class=\"energycle-process-h-step-title\">Integrate Downstream Handling<\/h3>\n                    <p class=\"energycle-process-h-step-desc\">Cooling, calibration, haul-off, and cutting are matched to the finished product and production requirement.<\/p>\n                    <div class=\"energycle-process-h-step-tags\">\n                        <span class=\"tag\">Downstream Line<\/span>\n                        <span class=\"tag\">Custom Layout<\/span>\n                    <\/div>\n                <\/article>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"compare\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Twin-Screw Extruder System vs Pelletizing-Focused Alternatives<\/h2>\n                <p class=\"energycle-section-desc\">This page covers a general extrusion platform. If your real goal is compounded pellets, the better match may be a pelletizing-focused line instead.<\/p>\n            <\/div>\n            <div class=\"energycle-compare-table-wrap\">\n                <table class=\"energycle-compare-table\">\n                    <thead>\n                        <tr>\n                            <th>Decision Factor<\/th>\n                            <th class=\"ours\">Twin-Screw Extruder System<\/th>\n                            <th>Twin-Screw Plastic Extruder<\/th>\n                            <th>Single-Screw Pelletizer<\/th>\n                        <\/tr>\n                    <\/thead>\n                    <tbody>\n                        <tr>\n                            <td>Primary Goal<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> General extrusion into profile, pipe, sheet, or similar products<\/td>\n                            <td>Compounding and pelletizing into uniform pellets<\/td>\n                            <td>Standard pellet recovery from prepared scrap<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Downstream Focus<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> Die forming with matched cooling and haul-off<\/td>\n                            <td>Integrated pellet cutting and pellet handling<\/td>\n                            <td>Pelletizing and discharge<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Best Process Fit<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> Extrusion production lines<\/td>\n                            <td>High-value compounds, masterbatch, and additive mixing<\/td>\n                            <td>General recycling projects with simpler feed and lower complexity<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>Mixing Intensity<\/td>\n                            <td>Configurable extrusion duty<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> Stronger compounding focus<\/td>\n                            <td><span class=\"energycle-compare-cross\"><\/span> Lower than twin-screw systems<\/td>\n                        <\/tr>\n                        <tr>\n                            <td>When to Choose<\/td>\n                            <td><span class=\"energycle-compare-check\"><\/span> When the final product is an extruded shape rather than pellets<\/td>\n                            <td>When pellet output and formulation control are the priority<\/td>\n                            <td>When feed is prepared and a standard pelletizing route is sufficient<\/td>\n                        <\/tr>\n                    <\/tbody>\n                <\/table>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"specs\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Technical Specifications<\/h2>\n                <p class=\"energycle-section-desc\">Final sizing depends on polymer type, die design, downstream equipment, and the intended extrusion product.<\/p>\n            <\/div>\n            <div class=\"energycle-specs-table-wrap\">\n                <table class=\"energycle-specs-table\" aria-label=\"Twin-screw extruder system technical specifications\">\n                    <tbody>\n                        <tr><th>Screw Diameter<\/th><td>50 &#8211; 150 mm<\/td><\/tr>\n                        <tr><th>L\/D Ratio<\/th><td>Up to 68:1<\/td><\/tr>\n                        <tr><th>Max Screw Speed<\/th><td>Up to 600 rpm<\/td><\/tr>\n                        <tr><th>Motor Power<\/th><td>55 &#8211; 450 kW<\/td><\/tr>\n                        <tr><th>Max Capacity<\/th><td>150 &#8211; 2000 kg\/h<\/td><\/tr>\n                    <\/tbody>\n                <\/table>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"gallery\" class=\"energycle-gallery-section\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Machine Gallery<\/h2>\n                <p class=\"energycle-section-desc\">A reference image showing modular screw-element configurations used to match the extruder to different polymer tasks.<\/p>\n            <\/div>\n            <div class=\"energycle-gallery-grid\">\n                <div class=\"energycle-gallery-item\">\n                    <img src=\"https:\/\/recycling.imgix.net\/extruder\/various%20types%20of%20screws.webp?fit=crop&amp;auto=format,compress&amp;fm=webp\" alt=\"Various screw configurations for twin-screw extruder systems\" width=\"1200\" height=\"800\" loading=\"lazy\" decoding=\"async\">\n                <\/div>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"video\" class=\"energycle-video-section\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Video Overview<\/h2>\n                <p class=\"energycle-section-desc\">A quick look at the modular twin-screw platform and how the extrusion system can be configured.<\/p>\n            <\/div>\n            <div class=\"energycle-video-container\" data-video-id=\"nQYTNK9Dy3c\" data-video-title=\"Twin-Screw Extruder System video\">\n                <button type=\"button\" class=\"energycle-video-trigger\" aria-label=\"Play Twin-Screw Extruder System video\">\n                    <img src=\"https:\/\/i.ytimg.com\/vi\/nQYTNK9Dy3c\/hq720.jpg\" alt=\"Twin-screw extruder system video cover\" width=\"1280\" height=\"720\" loading=\"lazy\" decoding=\"async\">\n                    <span class=\"play-button\" aria-hidden=\"true\"><\/span>\n                <\/button>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"related\">\n        <div class=\"energycle-wrapper\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Related Equipment and Alternatives<\/h2>\n                <p class=\"energycle-section-desc\">These are the closest adjacent options when the project might actually need pelletizing, stronger compounding, or a broader pelletizer comparison.<\/p>\n            <\/div>\n            <div class=\"energycle-product-grid\">\n                <a href=\"https:\/\/www.energycle.com\/twin-screw-plastic-extruder\/\" class=\"energycle-product-card energycle-product-col-span-1\" target=\"_blank\" rel=\"noopener noreferrer\">\n                    <h3>Twin-Screw Plastic Extruder<\/h3>\n                    <p>Choose this when the job is not only extrusion, but also compounding, devolatilization, and pellet production with stronger formulation control.<\/p>\n                <\/a>\n                <a href=\"https:\/\/www.energycle.com\/single-screw-plastic-pelletizing-machine\/\" class=\"energycle-product-card energycle-product-col-span-1\" target=\"_blank\" rel=\"noopener noreferrer\">\n                    <h3>Single-Screw Plastic Pelletizing Machine<\/h3>\n                    <p>Compare this route when the feed is prepared enough for a simpler pelletizing solution and high-intensity twin-screw mixing is unnecessary.<\/p>\n                <\/a>\n                <a href=\"https:\/\/www.energycle.com\/plastic-pelletizers\/\" class=\"energycle-product-card energycle-product-col-span-1\" target=\"_blank\" rel=\"noopener noreferrer\">\n                    <h3>Plastic Pelletizers<\/h3>\n                    <p>Use this overview page when you need to compare the main pelletizing architectures before choosing between single-screw, film, or twin-screw systems.<\/p>\n                <\/a>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"faq\" class=\"energycle-faq-section\">\n        <div class=\"energycle-wrapper energycle-faq-container\">\n            <div class=\"energycle-section-header\">\n                <h2 class=\"energycle-section-title\">Frequently Asked Questions<\/h2>\n                <p class=\"energycle-section-desc\">Questions we usually hear when buyers are deciding between a general twin-screw extruder and pelletizing-focused systems.<\/p>\n            <\/div>\n            <div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"tses-faq-t-1\" aria-controls=\"tses-faq-c-1\">\n                        <h3>What materials can this twin-screw extruder system process?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"tses-faq-c-1\" role=\"region\" aria-labelledby=\"tses-faq-t-1\">\n                        <p>It is commonly used for PVC and other thermoplastics depending on configuration. Final suitability depends on your polymer, product type, additives, and downstream line target.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"tses-faq-t-2\" aria-controls=\"tses-faq-c-2\">\n                        <h3>How do I choose screw diameter and L\/D ratio?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"tses-faq-c-2\" role=\"region\" aria-labelledby=\"tses-faq-t-2\">\n                        <p>Selection depends on throughput, melt stability, die type, venting needs, and the finished extrusion product. We usually size the system after reviewing the full production target.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"tses-faq-t-3\" aria-controls=\"tses-faq-c-3\">\n                        <h3>Do you offer venting or vacuum options?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"tses-faq-c-3\" role=\"region\" aria-labelledby=\"tses-faq-t-3\">\n                        <p>Yes. Venting and vacuum sections can be configured when moisture or volatiles need to be removed for cleaner extrusion and better product finish.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"tses-faq-t-4\" aria-controls=\"tses-faq-c-4\">\n                        <h3>Can the system be matched with downstream equipment?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"tses-faq-c-4\" role=\"region\" aria-labelledby=\"tses-faq-t-4\">\n                        <p>Yes. Dies, calibration, cooling, haul-off, and cutting equipment can be selected to build a complete extrusion line around the core twin-screw system.<\/p>\n                    <\/div>\n                <\/div>\n                <div class=\"energycle-faq-accordion-item\">\n                    <button type=\"button\" class=\"energycle-faq-accordion-header\" aria-expanded=\"false\" id=\"tses-faq-t-5\" aria-controls=\"tses-faq-c-5\">\n                        <h3>When should I choose a pelletizing-focused line instead?<\/h3>\n                        <i class=\"fa-solid fa-plus energycle-faq-accordion-icon\" aria-hidden=\"true\"><\/i>\n                    <\/button>\n                    <div class=\"energycle-faq-accordion-content\" id=\"tses-faq-c-5\" role=\"region\" aria-labelledby=\"tses-faq-t-5\">\n                        <p>If the main goal is compounded pellets or recycled pellet output rather than profiles, sheet, or pipe, a twin-screw pelletizing line or single-screw pelletizer is usually the better fit.<\/p>\n                    <\/div>\n                <\/div>\n            <\/div>\n        <\/div>\n    <\/section>\n\n    <section id=\"inquiry-form\" class=\"energycle-cta-section\">\n        <div class=\"energycle-wrapper energycle-cta-inner\">\n            <div class=\"energycle-cta-content\">\n                <h2 class=\"energycle-cta-title\">Need a Twin-Screw Extrusion Layout Matched to Your Product?<\/h2>\n                <p class=\"energycle-cta-subtitle\">Send us your polymer type, product target, output requirement, and downstream line preference. We will help define screw diameter, L\/D ratio, venting, die, and support equipment.<\/p>\n            <\/div>\n            <div class=\"energycle-cta-form\">\n                <div class='fluentform ff-default fluentform_wrapper_1 ffs_default_wrap'><form data-form_id=\"1\" id=\"fluentform_1\" class=\"frm-fluent-form fluent_form_1 ff-el-form-top ff_form_instance_1_1 ff-form-loading ffs_default\" data-form_instance=\"ff_form_instance_1_1\" method=\"POST\" ><fieldset  style=\"border: none!important;margin: 0!important;padding: 0!important;background-color: transparent!important;box-shadow: none!important;outline: none!important; min-inline-size: 100%;\">\n                    <legend class=\"ff_screen_reader_title\" style=\"display: block; margin: 0!important;padding: 0!important;height: 0!important;text-indent: -999999px;width: 0!important;overflow:hidden;\">Contact Form<\/legend><input type='hidden' name='__fluent_form_embded_post_id' value='11643' \/><input type=\"hidden\" id=\"_fluentform_1_fluentformnonce\" name=\"_fluentform_1_fluentformnonce\" value=\"0923245d21\" \/><input type=\"hidden\" name=\"_wp_http_referer\" value=\"\/ro\/wp-json\/wp\/v2\/posts\/11643\" \/><div data-type=\"name-element\" data-name=\"names\" class=\" ff-field_container ff-name-field-wrapper\" ><div class='ff-t-container'><div class='ff-t-cell '><div class='ff-el-group'><div class=\"ff-el-input--label asterisk-right\"><label for='ff_1_names_first_name_' id='label_ff_1_names_first_name_' >First Name<\/label><\/div><div class='ff-el-input--content'><input type=\"text\" name=\"names[first_name]\" id=\"ff_1_names_first_name_\" class=\"ff-el-form-control\" placeholder=\"First Name\" aria-invalid=\"false\" aria-required=false><\/div><\/div><\/div><div class='ff-t-cell '><div class='ff-el-group'><div class=\"ff-el-input--label asterisk-right\"><label for='ff_1_names_last_name_' id='label_ff_1_names_last_name_' >Last Name<\/label><\/div><div class='ff-el-input--content'><input type=\"text\" name=\"names[last_name]\" id=\"ff_1_names_last_name_\" class=\"ff-el-form-control\" placeholder=\"Last Name\" aria-invalid=\"false\" aria-required=false><\/div><\/div><\/div><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_1_email' id='label_ff_1_email' aria-label=\"Email\">Email<\/label><\/div><div class='ff-el-input--content'><input type=\"email\" name=\"email\" id=\"ff_1_email\" class=\"ff-el-form-control\" placeholder=\"Email Address\" data-name=\"email\"  aria-invalid=\"false\" aria-required=true><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_1_subject' id='label_ff_1_subject' aria-label=\"Subject\">Subject<\/label><\/div><div class='ff-el-input--content'><input type=\"text\" name=\"subject\" class=\"ff-el-form-control\" placeholder=\"Subject\" data-name=\"subject\" id=\"ff_1_subject\"  aria-invalid=\"false\" aria-required=true><\/div><\/div><div class='ff-el-group'><div class=\"ff-el-input--label ff-el-is-required asterisk-right\"><label for='ff_1_message' id='label_ff_1_message' aria-label=\"Your Message\">Your Message<\/label><\/div><div class='ff-el-input--content'><textarea aria-required=\"true\" aria-labelledby=\"label_ff_1_message\" name=\"message\" id=\"ff_1_message\" class=\"ff-el-form-control\" placeholder=\"Your Message\" rows=\"4\" cols=\"2\" data-name=\"message\" ><\/textarea><\/div><\/div><div class='ff-el-group ' ><div class='ff-el-input--content'><div data-fluent_id='1' name='h-captcha-response'><div\n\t\tdata-sitekey='b6bae662-9dec-41b0-803c-bebe5a608ce0'\n\t\tid='fluentform-hcaptcha-1-1'\n\t\tclass='ff-el-hcaptcha h-captcha'><\/div><\/div><\/div><\/div><div class='ff-el-group ff-text-left ff_submit_btn_wrapper'><button type=\"submit\" class=\"ff-btn ff-btn-submit ff-btn-md ff_btn_style wpf_has_custom_css\"  aria-label=\"Submit Form\">Submit Form<\/button><\/div><\/fieldset><\/form><div id='fluentform_1_errors' class='ff-errors-in-stack ff_form_instance_1_1 ff-form-loading_errors ff_form_instance_1_1_errors'><\/div><\/div>            <script type=\"text\/javascript\">\n                window.fluent_form_ff_form_instance_1_1 = {\"id\":\"1\",\"settings\":{\"layout\":{\"labelPlacement\":\"top\",\"helpMessagePlacement\":\"with_label\",\"errorMessagePlacement\":\"inline\",\"cssClassName\":\"\",\"asteriskPlacement\":\"asterisk-right\"},\"restrictions\":{\"denyEmptySubmission\":{\"enabled\":false}}},\"form_instance\":\"ff_form_instance_1_1\",\"form_id_selector\":\"fluentform_1\",\"rules\":{\"names[first_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"names[middle_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"names[last_name]\":{\"required\":{\"value\":false,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"email\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"},\"email\":{\"value\":true,\"message\":\"This field must contain a valid email\",\"global\":false,\"global_message\":\"This field must contain a valid email\"}},\"subject\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}},\"message\":{\"required\":{\"value\":true,\"message\":\"This field is required\",\"global\":false,\"global_message\":\"This field is required\"}}},\"debounce_time\":300};\n                            <\/script>\n            \n            <\/div>\n        <\/div>\n    <\/section>\n\n<\/div>\n\n<script>\n    (function () {\n        var page = document.getElementById('erm-tses');\n        if (!page) return;\n\n        page.querySelectorAll('.energycle-video-container').forEach(function (wrap) {\n            var btn = wrap.querySelector('.energycle-video-trigger');\n            if (!btn) return;\n            btn.addEventListener('click', function () {\n                var id = wrap.getAttribute('data-video-id');\n                if (!id) return;\n                var title = wrap.getAttribute('data-video-title') || 'YouTube video';\n                var iframe = document.createElement('iframe');\n                iframe.setAttribute('title', title);\n                iframe.setAttribute('allow', 'accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share');\n                iframe.setAttribute('allowfullscreen', '');\n                iframe.setAttribute('loading', 'lazy');\n                iframe.src = 'https:\/\/www.youtube.com\/embed\/' + id + '?autoplay=1&rel=0&modestbranding=1&playsinline=1&iv_load_policy=3';\n                wrap.replaceChildren(iframe);\n            });\n        });\n\n        var faqItems = page.querySelectorAll('.energycle-faq-accordion-item');\n        faqItems.forEach(function (item) {\n            var panel = item.querySelector('.energycle-faq-accordion-content');\n            if (panel) panel.setAttribute('aria-hidden', 'true');\n            var header = item.querySelector('.energycle-faq-accordion-header');\n            var icon = item.querySelector('.energycle-faq-accordion-icon');\n            if (!header || !panel || !icon) return;\n            header.addEventListener('click', function () {\n                var wasOpen = item.classList.contains('active');\n                faqItems.forEach(function (entry) {\n                    entry.classList.remove('active');\n                    var entryHeader = entry.querySelector('.energycle-faq-accordion-header');\n                    var entryPanel = entry.querySelector('.energycle-faq-accordion-content');\n                    var entryIcon = entry.querySelector('.energycle-faq-accordion-icon');\n                    if (entryHeader) entryHeader.setAttribute('aria-expanded', 'false');\n                    if (entryPanel) {\n                        entryPanel.setAttribute('aria-hidden', 'true');\n                        entryPanel.style.maxHeight = null;\n                    }\n                    if (entryIcon) {\n                        entryIcon.classList.remove('fa-minus');\n                        entryIcon.classList.add('fa-plus');\n                    }\n                });\n                if (!wasOpen) {\n                    item.classList.add('active');\n                    header.setAttribute('aria-expanded', 'true');\n                    panel.setAttribute('aria-hidden', 'false');\n                    panel.style.maxHeight = panel.scrollHeight + 'px';\n                    icon.classList.remove('fa-plus');\n                    icon.classList.add('fa-minus');\n                }\n            });\n        });\n    }());\n<\/script>\n\n<script type=\"application\/ld+json\">\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@graph\": [\n    {\n      \"@type\": \"Product\",\n      \"name\": \"Twin-Screw Extruder System\",\n      \"description\": \"Modular co-rotating twin-screw extruder system for stable melting, conveying, devolatilization, and continuous extrusion across profile, pipe, sheet, and polymer processing applications.\",\n      \"image\": [\n        \"https:\/\/recycling.imgix.net\/extruder\/various%20types%20of%20screws.webp?fit=crop&auto=format,compress&fm=webp\",\n        \"https:\/\/i.ytimg.com\/vi\/nQYTNK9Dy3c\/hq720.jpg\"\n      ],\n      \"brand\": {\n        \"@type\": \"Brand\",\n        \"name\": \"Energycle\"\n      },\n      \"manufacturer\": {\n        \"@type\": \"Organization\",\n        \"name\": \"Energycle\"\n      },\n      \"category\": \"Twin-screw extrusion equipment\",\n      \"additionalProperty\": [\n        {\n          \"@type\": \"PropertyValue\",\n          \"name\": \"Screw diameter\",\n          \"value\": \"50 - 150 mm\"\n        },\n        {\n          \"@type\": \"PropertyValue\",\n          \"name\": \"L\/D ratio\",\n          \"value\": \"Up to 68:1\"\n        },\n        {\n          \"@type\": \"PropertyValue\",\n          \"name\": \"Capacity range\",\n          \"value\": \"150 - 2000 kg\/h\"\n        }\n      ]\n    },\n    {\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What materials can this twin-screw extruder system process?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It is commonly used for PVC and other thermoplastics depending on configuration. Final suitability depends on your polymer, product type, additives, and downstream line target.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I choose screw diameter and L\/D ratio?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Selection depends on throughput, melt stability, die type, venting needs, and the finished extrusion product. We usually size the system after reviewing the full production target.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do you offer venting or vacuum options?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes. Venting and vacuum sections can be configured when moisture or volatiles need to be removed for cleaner extrusion and better product finish.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can the system be matched with downstream equipment?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes. Dies, calibration, cooling, haul-off, and cutting equipment can be selected to build a complete extrusion line around the core twin-screw system.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"When should I choose a pelletizing-focused line instead?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"If the main goal is compounded pellets or recycled pellet output rather than profiles, sheet, or pipe, a twin-screw pelletizing line or single-screw pelletizer is usually the better fit.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is a twin-screw extruder system used for in recycling?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"A twin-screw extruder system in recycling is used for compounding recycled plastics with additives, blending different polymer types, processing filled materials (CaCO3, glass fiber), reactive extrusion (chain extension for PET), and producing high-specification recycled compounds for automotive, appliance, and construction applications.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What throughput can a twin-screw extruder achieve?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Twin-screw extruders for recycling range from 50 kg\/hr (lab\/pilot scale, 20mm diameter) to 3000+ kg\/hr (production scale, 135mm+ diameter). Standard recycling applications use 65-95mm diameter screws producing 300-1500 kg\/hr. Throughput depends on polymer type, filler loading, and screw configuration.\"\n          }\n        }\n      ]\n    },\n    {\n      \"@type\": \"VideoObject\",\n      \"name\": \"Twin-Screw Extruder System video\",\n      \"description\": \"Video overview of the modular twin-screw extruder system.\",\n      \"thumbnailUrl\": \"https:\/\/i.ytimg.com\/vi\/nQYTNK9Dy3c\/hq720.jpg\",\n      \"embedUrl\": \"https:\/\/www.youtube.com\/embed\/nQYTNK9Dy3c\",\n      \"uploadDate\": \"2026-03-24\"\n    }\n  ]\n}\n<\/script>\n","protected":false},"excerpt":{"rendered":"<p>O platform\u0103 fiabil\u0103 de extrudare cu dou\u0103 \u0219necuri corotative, construit\u0103 pentru extrudarea zilnic\u0103. Componentele modulare, \u0219necurile autocur\u0103\u021bate \u0219i zonarea precis\u0103 a temperaturii ofer\u0103 un randament stabil, cu ventila\u021bie op\u021bional\u0103 \u0219i echipamente complete \u00een aval pentru profile, \u021bevi \u0219i tabl\u0103.<\/p>","protected":false},"author":1,"featured_media":11657,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[137],"tags":[],"class_list":["post-11643","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-plastic-pelletizing"],"_links":{"self":[{"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/posts\/11643","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/comments?post=11643"}],"version-history":[{"count":0,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/posts\/11643\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/media\/11657"}],"wp:attachment":[{"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/media?parent=11643"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/categories?post=11643"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.energycle.com\/ro\/wp-json\/wp\/v2\/tags?post=11643"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}