HDPE Bottle Washing and Flake Recovery System
Linija za recikliranje HDPE boca
Convert post-consumer HDPE bottles such as milk jugs, detergent bottles, shampoo bottles, and household chemical containers into clean, low-moisture flakes. This modular line combines bale opening, pre-washing, wet granulation, hot washing, friction cleaning, sink-float separation, and drying for stable downstream extrusion or pelletizing.
Why Choose This HDPE Bottle Recycling Line
Built for high-purity bottle flake production with stable throughput, lower contamination carryover, and modular upgrades for different bottle mixes and wash targets.
HDPE pahuljice visoke čistoće
Hot washing, friction cleaning, and density separation reduce paper, glue, labels, oils, and heavy-polymer contamination before drying.
Pouzdan protok
From bale opening to flake discharge, each stage is designed to stabilize feed flow and reduce downtime caused by labels, caps, fines, and inconsistent bottle input.
Water and Utility Control
Closed-loop water options, staged rinsing, and optional DAF support help reduce fresh water use and simplify discharge compliance.
Low Moisture Discharge
Centrifugal dewatering and hot air drying typically bring final flake moisture down to a level suitable for storage, extrusion, or pelletizing.
Modular for Bottle Type, Label Load, and Purity Target
The line can be configured around bale condition, cap content, label glue load, heavy contamination, and optional flake sorting so the final system matches your downstream product target rather than a fixed bottle-wash layout.
Video demonstracija
Watch the HDPE bottle recycling line in operation from bale opening through washing, separation, and dried flake discharge.
Modularna izvrsnost
Ključne komponente linije
Each module is selected to improve bottle opening, contamination removal, density separation, and final moisture control.
Debaler and Pre-Sorting
A debaler opens compact bottle bales and creates a stable infeed for manual picks, magnets, and early contaminant removal.
View debalerPre-Wash and Fines Removal
Trommel or pre-wash stages remove sand, stones, fines, and loose label material before size reduction.
Mokri granulator
Bottle size reduction with water flushing prepares consistent flakes for washing and lowers heat in the crushing stage.
Hot Washing and Friction Cleaning
Hot washing softens glue and residues while friction cleaning strips labels, dirt, and stubborn surface contamination.
View hot washerOdvajanje sudopera i plovka
Density-based separation helps remove PET, PVC, metal, and heavy contamination while keeping the HDPE-rich stream moving forward.
Dewatering, Drying, and Optional Flake Sorting
Final rinsing, dewatering, drying, and optional flake sorting improve moisture, color consistency, and downstream pelletizing stability.
Radni slijed
Tijek procesa
A staged route designed to turn dirty mixed HDPE bottle input into cleaner, drier flakes for reuse or pelletizing.
Debaling and Pre-Sorting
Bottle bales are opened and obvious metals, stones, and non-plastic contaminants are removed before wet processing starts.
Pre-Wash and Fines Removal
Sand, dirt, fines, and loose label fragments are reduced early to improve downstream washing efficiency.
Vlažna granulacija
Bottles are cut into uniform flakes with water-assisted crushing to stabilize flake size and start pre-cleaning.
Hot Wash and Friction
Glue, oils, and label residue are stripped from the flake stream through heated washing and high-speed friction cleaning.
Odvajanje sudopera i plovka
Heavy polymers and dense contaminants are separated from the HDPE-rich stream to improve flake purity.
Rinse, Dewater, and Dry
Final rinsing, centrifugal dewatering, and thermal drying reduce moisture before bagging, extrusion, pelletizing, or flake sorting.
Debaling and Pre-Sorting
Bottle bales are opened and gross contamination is removed.
Pre-Wash and Fines Removal
Sand and loose paper are reduced early in the line.
Vlažna granulacija
Bottles are reduced into uniform wash-ready flakes.
Hot Wash and Friction
Residues, glue, and label contamination are stripped away.
Odvajanje sudopera i plovka
Heavy polymers and dense contamination are removed.
Rinse, Dewater, and Dry
Final moisture is lowered before storage or pelletizing.
Tehničke specifikacije
Typical project planning range for HDPE bottle washing lines. Final utility load and staffing depend on bottle condition, label content, contamination, and target output quality.
| Kapacitet (kg/h) | Instalirana snaga (kW) | Potrebna površina (m2) | Potrebno osoblje | Potrebna para (kg/h) | Potreban komprimirani zrak (MPa) | Potrebna voda (m3/h) |
|---|---|---|---|---|---|---|
| 500 | 220 | 400 | 8 | 350 | 0.6 to 0.8 | 1 |
| 1000 | 500 | 750 | 10 | 500 | 0.6 to 0.8 | 3 |
| 2000 | 700 | 1000 | 12 | 800 | 0.6 to 0.8 | 5 |
| 3000 | 900 | 1500 | 12 | 1000 | 0.6 to 0.8 | 6 |
| 4500 | 1000 | 2200 | 16 | 1300 | 0.6 to 0.8 | 8 |
| 6000 | 1200 | 2500 | 16 | 1800 | 0.6 to 0.8 | 10 |
Prijeđite prstom vodoravno za pregled cijele tablice na mobitelu.
Machine Layout and Output Reference
A typical modular flow from bottle bale opening to clean HDPE flakes, with optional sorting and water treatment support.
Example layout for an HDPE bottle washing and recycling line
Prijave
This washing line is designed for rigid HDPE bottle recovery projects that need clean flakes with stable moisture and lower carryover contamination.
Post-Consumer HDPE Bottles
Milk jugs, detergent bottles, shampoo containers, and household chemical packaging from municipal or commercial collection streams.
Household bottle recoveryHigh Label and Glue Loads
Suitable for bottle streams that need stronger label removal and residue control before flake sale or pelletizing.
Baled Bottle Input
A good fit for compacted post-consumer bottle bales that need debaling, metered feeding, and early contaminant removal.
Regrind and Flake Preparation
Produces washed HDPE flakes for pipe, sheet, blow molding, extrusion, and recycled pellet production workflows.
Optional Flake Sorting
Can be paired with optical sorting where color consistency and resin purity targets are stricter than basic wash-flake production.
Integrated Bottle-to-Flake Recycling Projects
A strong option for plants that want one coordinated route from dirty HDPE bottle input to dried flake output with expansion paths for sorting, water treatment, and pelletizing.
Često postavljana pitanja
Quick answers for buyers comparing HDPE bottle washing configurations, contamination removal steps, and output quality targets.
With hot washing, friction cleaning, sink-float separation, and final drying, HDPE flakes can reach low moisture with reduced paper, glue, and heavy-polymer contamination. Final purity still depends on bottle mix and sorting level.
Typical input includes milk jugs, detergent bottles, shampoo bottles, and household chemical containers. For heavily contaminated bottles, stronger pre-washing and hot-wash capacity can be added.
Pre-washing and friction cleaning remove loose label fragments, while density separation removes heavier polymers and contamination. PP caps are close in density to HDPE, so optional optical sorting may be added when purity requirements are stricter.
Typical projects require electricity, water circulation, compressed air, and steam for hot washing when that stage is included. Actual utility load depends on throughput, contamination, and whether the system uses closed-loop water treatment.
Yes. The line can be configured for standards such as EU 400V 50Hz and US 460V 60Hz, with project-specific compliance support depending on destination and site requirements.
Zatražite ponudu
Tell us your input condition, label and glue load, target capacity, and whether you need sorted color flakes or pelletizer-ready material. We will recommend a suitable HDPE bottle washing configuration.
