PP/PE 재활용용 부유식 분리 탱크(침강식 분리 탱크)
이것 浮动分離槽 (sink‑float tank) uses water density to recover floating PP/PE while removing heavy plastics (PET, PVC, ABS) and debris. The water‑saving two‑zone design helps improve output purity and stabilize downstream washing, dewatering, and extrusion.
Why This Floating Separation Tank Works
Reliable density separation, integrated washing, and a water‑saving tank layout to stabilize PP/PE recovery.
Clean PP/PE Fraction
Separates light plastics that float (PP/PE) from heavy polymers and contaminants that sink.
오염 제거
Helps remove dirt, stones, glass, and metal fragments—reducing load on downstream equipment.
Pre‑Washing Effect
Agitation in water supports preliminary washing to improve output quality and consistency.
Two‑Zone Water Saving
Primary + polishing zones help maintain higher cleanliness while reducing overall water replacement.
Adjustable Paddle Control
Frequency‑controlled paddle motors guide floating material steadily to discharge.
Industrial Build
304 stainless steel interior with heavy‑duty carbon steel frame supports long‑term reliability.
How the Floating Separation Tank Works
A proven method: water density creates a clear split between floating PP/PE and sinking heavy fractions and contaminants.
Step 1
인피드
Mixed plastic flakes enter the tank via a screw conveyor and disperse into the water.
Step 2
침강-부유 분리
Heavy materials (PET, PVC, ABS) and debris sink; light plastics (PP, PE) float to the surface.
Step 3
Collection & Discharge
Surface paddles move floating PP/PE to discharge while bottom conveyance removes sinking fractions.
Design Innovations
Better separation, cleaner output, and lower operating cost—driven by a practical two‑stage tank layout.
W‑Shaped Sedimentation Bottom
A “W” bottom promotes faster settling of heavy dirt and debris, improving cleanliness and separation stability.
Primary + Polishing Zones
Handles the dirty infeed in the first zone, then “polishes” floating plastic in cleaner water for higher purity and reduced water use.
Customization for Your Line
Share the details below so we can size the tank correctly and quote the right configuration.
Material & Contamination
- Input stream: PP/PE flakes, mixed rigid plastics, or PET flakes with cap/label contamination
- Contaminants: sand, stones, glass, metal fragments
- Target output purity and acceptable carry‑over
Capacity & Residence Time
- Throughput (kg/h) and flake size distribution
- Tank length/width for stable separation at your feed rate
- Paddle speed control to prevent clumping and overflow
Water & Discharge Design
- Water circulation, filtration, and make‑up water plan
- Bottom discharge method for sinking fractions
- Two‑zone layout if you need lower water consumption
Need a quick recommendation? Send your material, throughput, and layout space—our engineers will propose a configuration.
기술 사양
Standard configuration ranges. We can engineer custom sizes based on your line layout and throughput target.
| Interior width | 1000–1800 mm |
|---|---|
| 전체 길이 | 4–7 meters |
| 내부 소재 | Type 304 stainless steel (corrosion resistance) |
| 외부 프레임 | Heavy‑duty carbon steel (structural integrity) |
| 패들 모터 | 1.5 kW × 2 (frequency control for adjustable speed) |
| 인증 | CE 인증 가능 |
메모: Larger or higher‑throughput models can be built upon request.
Floating Separation Tank Photos
A reference view of typical build and installation.
자주 묻는 질문
부유식 분리 탱크는 무엇에 사용되나요?
It is used for sink‑float separation to recover light plastics (PP/PE) while removing heavy plastics (PET/PVC/ABS) and debris. It also provides a preliminary washing step.
Can it separate PP from PE?
PP와 PE는 모두 가벼운 플라스틱으로 일반적으로 물에 뜨기 때문에 탱크에서 더 무거운 플라스틱들과 분리됩니다. PP와 PE를 분리하려면 추가적인 공정이 필요할 수 있습니다.
적절한 수조 크기는 어떻게 선택해야 할까요?
Key inputs are throughput (kg/h), flake size, contamination level, and available layout space. Share these details and we can recommend width/length and paddle configuration.
CE 인증을 제공하시나요?
Yes. CE certification is available, and we provide installation guidance and after‑sales support.
How do I get the right configuration and price?
Send your material list, contamination level, throughput target, and available layout space. We’ll recommend a tank width/length and discharge configuration, then provide a quotation.
보증 및 설치
시운전부터 사후 서비스에 이르기까지, 당사는 안정적인 생산과 장기적인 신뢰성을 보장하도록 지원합니다.
1년 제한 보증
당사는 정상적인 작동 및 유지 관리 조건 하에서 주요 부품에 대해 1년 제한 보증을 제공합니다.
시운전 지원
We provide installation guidance, parameter suggestions, and after‑sales support to keep your washing line running smoothly.
견적 요청
Tell us your input material, contamination level, and required capacity. We’ll recommend the right Floating Separation Tank configuration and quote.
이메일로 받으시려면 사용하세요. 연락처 페이지 더 빠른 경로를 위해.
