Pre-Wash Bottle De-Labeling
Stroj za uklanjanje naljepnica s plastičnih boca
High-efficiency PET bottle de-labeler removes OPP, PVC shrink-sleeve, paper, and PS labels with 95–98% effectiveness while minimizing bottle breakage and improving downstream washing quality.
Why Use a Bottle De-Labeler?
Enhance PET flake purity and safeguard downstream equipment by removing labels, sleeves, and adhesives before washing and float-sink separation.
95–98% Label Removal
Alloy jagged knives and friction baffles strip OPP, PVC shrink sleeves, paper, and PS labels efficiently.
Low Bottle Breakage
Optimized blade clearance and drum geometry minimize damage, ensuring bottles remain intact for crushing.
Dry or Wet Modes
Operate dry for dust removal or add spray bars for pre-rinse and glue residue removal before washing.
Clean Separation
Labels are discharged through dedicated ports to minimize contamination in the bottle stream and enhance rPET quality.
How the Plastic Bottle Label Remover Works
A rotating drum, serrated knives, and controlled friction cleanly separate labels from PET bottles with minimal damage.
Steady Infeed
Loose bottles are fed into the inclined drum via conveyor or hopper to maintain consistent throughput.
Friction + Knife Action
Serrated alloy knives and internal baffles create shear to cut and peel labels from bottle surfaces.
Label Discharge
Detached labels fall through slots to dedicated outlets; optional dust extraction captures fines and paper fibers.
Clean Bottle Output
De-labeled bottles exit for crushing, float-sink separation, friction washing, and dewatering.
Applications Across Bottle Recycling
Essential pre-treatment for high-purity rPET production and mixed bottle streams.
Linije za recikliranje PET boca
Remove cap and body labels before float-sink density separation. See our Sink-Float Tank for PP/PE vs. PET separation.
Shrink Sleeve Removal
Efficiently handles PVC and OPS shrink sleeves commonly used on beverage bottles and cosmetics packaging.
Downstream Washing Boost
Improves friction washer performance and reduces wastewater load. Explore the Brza peračica trenja.
Tehničke specifikacije
Typical configuration ranges shown below. We customize drive power, drum size, and knife layout to match bottle size, label type, and throughput.
| Parametar | Typical Range |
|---|---|
| Removal Rate | 95–98% (label & condition dependent) |
| Propusnost | 1–4 t/h (customizable) |
| Snaga motora | 7.5–22 kW |
| Duljina bubnja | 2–4 m |
| Promjer bubnja | 800–1200 mm |
| Materijal noža | Alloy serrated blades (replaceable) |
| Mode | Dry standard; wet spray bars optional |
| Dust Extraction | Optional cyclone/collector |
Video demonstracija
Machine Photos
Često postavljana pitanja
What label types can this machine remove?
OPP wrap-around, PVC/OPS shrink sleeves, paper, and PS labels commonly used on PET beverage bottles. Removal rate varies by label material and glue.
Will it damage bottles before crushing?
Blade clearance and drum speed are adjusted to minimize bottle breakage while ensuring effective label detachment.
Do I need wet operation?
Dry operation is standard. Wet operation with spray bars is available to loosen adhesives and reduce dust, enhancing downstream float-sink and friction washing steps.
How can I improve removal rate further?
Stabilize infeed, adjust residence time and drum speed, keep knives sharp, and enable dust extraction. For stubborn sleeves, use warm spray bars.
Jamstvo i montaža
Includes a 1-year limited warranty. We provide on-site commissioning, operator training, and optional maintenance plans tailored to your bottle mix and throughput.
Ready to Improve Label Removal?
Tell us about your bottle feedstock, label types, and production targets. We’ll configure the right de-labeler for your line.
Komentari su zatvoreni.