Zrozumienie trendów w zakresie maszyn do recyklingu PET na rok 2026

PET recycling equipment keeps moving toward tighter quality control. The driver is simple: more brands and regulators want higher recycled content in packaging, and that pushes recyclers toward cleaner flakes, more consistent pellets, and better contamination control.

This article is written as a selection guide for the most common project scope: hot-washed PET flakes I standard PET pelletizing (for fiber, strapping, and sheet markets). It also highlights the “2025 trends” that directly change equipment choices.

Quick Takeaways

• Start with your output target: sell hot-washed flakes, or pelletize for a specific market.
• Sorting and PVC risk management increasingly decide product value and buyer acceptance.
• Washing performance is now judged by label/adhesive removal I stable water quality control.
• Drying and moisture management become critical the moment you pelletize.

1) The “2025 Trend” That Matters Most: Higher Purity Requirements

In the EU, the Single-Use Plastics Directive sets recycled content targets for beverage bottles, including a PET target by 2025. Even outside Europe, similar brand commitments push demand for higher-quality rPET.

For equipment selection, the practical implications are:
– stronger PVC management (sorting and QC)
– more stable hot washing and rinsing
– better moisture control before any melt processing

2) Module Checklist: Hot-Washed PET Flake Line (Typical)

If your main product is hot-washed flakes, your line usually needs these modules (the exact order varies by site layout and contamination profile):

1. Receiving + bale opening + pre-sort (remove non-target items early)
2. Metal removal (protect cutting equipment and pumps)
3. Redukcja rozmiaru (bottle crushing/granulation into consistent flakes)
4. Pre-wash / rinsing (remove loose dirt and reduce organics load)
5. Hot wash (label/adhesive and oil removal where required)
6. Friction washing + separation (improve cleanliness and remove light contaminants)
7. Płukanie (reduce carryover of chemicals and fines)
8. Mechanical dewatering (reduce free water before thermal drying)
9. Thermal drying + storage (produce stable, shippable flakes)

Energycle’s PET washing line reference: Linia do mycia butelek PET

Related modules often used in PET projects:
– Sorting systems (front-end): MSW sorting machines
– Washing systems (general module reference): system mycia recyklingowego
– Centrifugal dewatering: suszarka odśrodkowa odwadniająca

3) When “Hot-Washed Flakes” Are Not Enough (Pelletizing Add-On)

If you plan to sell pellets, the project scope expands. You typically add:

• Stable feeding for flakes (to avoid bridging and surging)
• Melt filtration strategy matched to your contamination window
• Degassing capability appropriate to your moisture/volatile load
• Pelletizing method matched to your market and operating preference

Energycle pelletizing systems reference: granulatory do plastiku

If your buyer accepts standard rPET pellets for fiber/sheet applications, a well-configured “wash + dry + pelletize” line is often the most direct path. If your target is packaging-grade or bottle-to-bottle, requirements can change substantially (decontamination validation, traceability, and stricter QC).

4) Decision Matrix (Typical Configurations)

Use this matrix to map your target product to the modules you should budget for.

5) Selection Questions (RFQ Checklist)

Before you request quotes, answer these questions. They prevent under-sizing and “surprise” upgrades after commissioning.

Feedstock and contamination

• What is your bale specification and how often does it vary?
• What is the expected PVC risk profile (sleeves/labels/mixed bottles)?
• How much paper/label content do you expect, and what label types dominate?
• What non-plastics show up routinely (glass, stones, metals)?

Output and quality

• Are you selling flakes or pellets? Who is the buyer and what do they reject?
• What QC checks will you run (PVC checks, moisture checks, contamination count)?
• Do you need color sorting (clear vs light blue vs mixed color)?

Utilities and site constraints

• What water strategy do you have (closed-loop, partial reuse, discharge limits)?
• What space and elevation constraints exist for tanks, conveyors, and dryers?
• What maintenance model do you want (fast screen changes, spare modules, service access)?

If you want Energycle to recommend a line scope based on your feedstock and output spec, share your material photos and targets here: Skontaktuj się z nami

6) FAQ

Do I always need hot washing for PET?

Not always, but many bottle streams require hot washing to remove label glue and oils. The decision should be driven by buyer quality requirements and your label/adhesive profile.

What is the biggest quality risk in PET recycling equipment selection?

PVC contamination management is a common top risk. Your sorting and QC plan should match your bale reality, not your “average case.”

Can I start with flakes and add pelletizing later?

Sometimes, but pelletizing often requires tighter drying and filtration control than a flake-only project. Plan your layout and utilities so an upgrade is realistic.

Why do some plants struggle with “gray flakes” or inconsistent cleanliness?

A common cause is unstable water quality and fines carryover. Washing performance depends on rinse strategy, filtration, and sludge management—not only the hot washer itself.

What should I link internally from a PET guide like this?

Link to the specific modules buyers evaluate:
– PET washing line: Linia do mycia butelek PET
– Sorting systems: MSW sorting machines
– Pelletizers: granulatory do plastiku
– Centrifugal dryer: suszarka odśrodkowa odwadniająca

References

• EU — Single-Use Plastics Directive 2019/904 (official text)
• APR — Model Bale Specifications (PET quality and contamination considerations)
• ISO — Plastics recycling guideline (ISO 15270 overview)