스크류 프레스 탈수 시스템
A robust, cost-effective alternative to thermal heaters. This screw press dewatering system mechanically extracts moisture from PE film, PP film, pulp, sludge, and soft plastic scrap with low energy consumption and stable continuous operation.
왜 우리 스크류 프레스를 선택해야 할까요?
Engineered to outperform basic drying methods, the system combines mechanical pressure, durable construction, and flexible application coverage in one compact dewatering unit.
탁월한 습기 제거 기능
Reliably reduces moisture content to below 15 percent for most PE and PP film applications, preparing material for thermal drying, agglomeration, or pelletizing.
에너지 효율적인 운영
Uses mechanical compression instead of heat-intensive evaporation, helping lower operating cost before the material enters downstream drying equipment.
Versatile Application Range
Suitable for washed plastic film, fibrous pulp, sludge, and selected food waste streams where bulk water must be removed continuously and predictably.
Continuous Compression
The variable-pitch screw shaft pushes material through a tapered barrel, increasing pressure gradually and reducing sudden load shocks.
Lower Maintenance Demand
Slow-speed rotation, heavy-duty gearbox construction, and accessible perforated casing sections help simplify routine inspection and cleaning.
Better Downstream Stability
By removing bulk water before hot air drying or extrusion, the screw press helps stabilize thermal load, pellet quality, and overall line efficiency.
How the Screw Press Works
A progressive compression design moves wet material through the machine while extracting water through the perforated casing.
급송
Wet film, pulp, or sludge enters the vertical feeder where the screw shaft begins carrying material forward.
압축
The screw diameter and pitch progressively increase pressure against the perforated outer casing.
Water Drainage
Free water is forced through fine casing perforations while solid material remains inside the compression chamber.
해고하다
Dewatered material exits through a narrow discharge gap and moves to thermal drying, storage, or pelletizing.
급송
Wet material enters the vertical feeder and is captured by the rotating screw shaft.
압축
Progressive pressure squeezes water from the material as it advances through the barrel.
Water Drainage
Perforations allow extracted water to drain while solids continue moving forward.
해고하다
The compressed output leaves the machine ready for the next drying or pelletizing stage.
Precision Engineering for Continuous Dewatering
The robust casing, variable-pitch screw shaft, and controlled discharge gap are designed to prevent clogging while maintaining stable pressure and throughput.
기술 사양
Standard data is listed below. Final configuration can be matched to your feed material, target moisture, throughput, and available plant layout.
| 매개변수 | 사양 |
|---|---|
| 기계 유형 | 산업용 스크류 프레스 탈수 시스템 |
| 최종 수분 함량 | < 15 percent, material dependent |
| 기계 길이 | 4 to 6 m, customizable |
| 배수 방법 | Fine perforated casing |
| 작동 모드 | Continuous mechanical compression |
| 주요 구성 요소 | Variable-pitch screw shaft and heavy-duty gearbox |
| 적용 분야 | PE film, PP film, pulp, sludge, and selected food waste |
모바일에서 전체 표를 보려면 가로로 밀어 보세요.
이상적인 응용 프로그램
The screw press is useful wherever bulk water removal improves handling, drying cost, disposal cost, or downstream process stability.
플라스틱 필름 재활용
Essential for PE and PP film washing lines, removing water from washed film before thermal drying, agglomeration, or pelletizing.
Core applicationWastewater Sludge
Reduces sludge volume and weight, lowering disposal cost and simplifying transport or further treatment.
부피 감소Paper and Pulp
Dewaters pulp suspensions and fibrous rejects in paper mill operations where steady compression is preferred.
Fibrous materialFood Waste and Organic Residue
Can be configured for selected wet organic streams that need moisture reduction before disposal, storage, or further processing.
Custom setupWarranty and Support
Installation Guidance and After-Sales Support
A screw press is usually installed inside a larger washing or drying line, so commissioning support and process matching matter as much as the equipment itself.
1년 제한 보증
All screw press dewatering systems include a one-year limited warranty covering mechanical components against manufacturing defects.
시운전 지원
We provide installation guidance, recommended parameter setup, and after-sales support to help the line run stably from day one.
Screw Press Dewatering System FAQs
Answers to the most common questions about moisture removal performance, machine selection, and maintenance.
For most soft plastics like PE film, the system can reliably reduce moisture content to below 15 percent. This is an ideal level before a subsequent thermal drying system or agglomerator.
A screw press applies compression force and is generally more effective for materials that hold water stubbornly, such as thin film or sludge. A centrifugal dryer uses high-speed rotation and is better suited to rigid flakes.
Yes. Standard industrial units are commonly 4 to 6 meters long, and screw length, casing design, and discharge configuration can be adjusted for your facility layout and throughput target.
Yes. Slow rotational speed reduces wear, and the perforated casing is designed for external cleaning and routine inspection. The gearbox requires normal periodic maintenance.
Please send your material type, input moisture, target output moisture, throughput requirement, local voltage, and whether the screw press will be installed in a complete washing line.
Ready to Boost Your Dewatering Efficiency?
Contact us for the latest pricing, lead time, and machine recommendations for your Screw Press Dewatering System.