Horizontal Balers for Waste Paper, Cardboard and Recyclables
반자동 수평 압축기
Semi-automatic horizontal balers for waste paper, OCC, cardboard and selected plastic recycling applications. Compare seven WB and WS models with 30–100 ton pressing force, different chamber sizes and bale dimensions. Feeding, controls, tying and discharge arrangements are specified for your material and production needs; semi-automatic operation still requires operator involvement in tying and handling.
Choose a Horizontal Baler Around Your Material and Bale Requirements
Compare the WB and WS model specifications below, then confirm the feeding, tying and discharge configuration for your site. Throughput depends on the material and operating cycle, not pressing force alone.
Bale Discharge Matched to the Model
Open-gate discharge is available on the configurations shown. Confirm the gate arrangement, operating clearance and bale removal method for the selected model.
A Range of Chamber and Bale Sizes
The range covers compact 30–40 ton models and larger 60–100 ton machines. Match loose material volume, feed opening and finished bale dimensions to your operation.
Optional Scrap Collection Integration
For suitable paper trims and lightweight production scrap, an optional cyclone or collection system can feed the baler. Material suitability and integration are confirmed during selection.
Cutting Configuration for Paper Trims
A double-cutting configuration can assist with paper trims and cardboard offcuts. Confirm its availability and suitability for the selected model and feedstock.
Bales Sized for Storage and Transport
Select bale dimensions and tying arrangements around your handling equipment and buyer requirements. Bale density varies with the material, moisture and operating settings.
Controls and Hydraulic Configuration
Manual and PLC-based control configurations are selected to suit the model and work cycle. Confirm the controls, safety interlocks and operator tasks in the final proposal.
대표적인 재료 및 산업 분야
Paper and cardboard are core applications. PET bottles and PP/PE film require a suitable model, tying arrangement and feed preparation; confirm the configuration for each material rather than assuming one setup handles every stream.
판지 및 골판지 공장
골판지 상자 조각, OCC 자투리 및 골판지 폐기물을 압축하여 보관 및 운송이 용이한 밀도 높은 묶음으로 만듭니다.
인쇄 및 제지 공장
신문 용지, 잡지, 잘린 종이 및 생산 과정에서 지속적으로 발생하는 유사한 섬유 폐기물에 적합합니다.
PET 병 재활용
For bottle collection and recycling sites, subject to confirmation of bottle condition, feeding, bale density and tying requirements.
PP 및 PE 필름 가공
부피 감소와 공장 환경 개선이 우선시될 때 필름 조각, 재단 잔여물, 포장 폐기물 처리에 유용합니다.
산업 폐기물 통합
For factories and recycling centers consolidating sorted recyclable streams. Keep different materials in separate bales when required by downstream buyers.
중급 자동화 업그레이드
수동 수직 베일링 시스템과 완전 자동 컨베이어 공급식 수평 베일링 시스템 사이의 중간 단계로 자주 선택됩니다.
반자동 수평 베일링 공정은 어떻게 작동할까요?
이 기계는 완전 자동 압축기보다 작동 구조가 더 간단하며, 흩어진 재활용 재료를 운송 가능한 덩어리로 압축합니다.
재료를 공급하세요
Load loose paper, cardboard or an approved recyclable stream into the feed opening. Manual, conveyor or cyclone feeding depends on the agreed configuration.
Compress Horizontally
The hydraulic ram compacts the material through repeated strokes. Controls and operator tasks depend on the selected model.
Reach the Bale Size
Build the bale to the required dimensions. The WB models list fixed reference bale dimensions; the WS models list a variable length L.
짚단을 묶으세요
The operator completes manual or assisted tying as specified. Semi-automatic does not mean fully automatic wire tying.
Discharge and Handle
Release and remove the tied bale using the selected discharge arrangement. Keep gate access and handling clearance in the equipment layout.
재료를 공급하세요
Load loose paper, cardboard or an approved recyclable stream into the feed opening. Manual, conveyor or cyclone feeding depends on the agreed configuration.
Compress Horizontally
The hydraulic ram compacts the material through repeated strokes. Controls and operator tasks depend on the selected model.
Reach the Bale Size
Build the bale to the required dimensions. The WB models list fixed reference bale dimensions; the WS models list a variable length L.
짚단을 묶으세요
The operator completes manual or assisted tying as specified. Semi-automatic does not mean fully automatic wire tying.
Discharge and Handle
Release and remove the tied bale using the selected discharge arrangement. Keep gate access and handling clearance in the equipment layout.
Compare Semi-Automatic, Fully Automatic and Vertical Balers
Compare the operating method as well as hourly volume. A larger semi-automatic model can suit substantial throughput, provided the site can support feeding, tying and bale handling.
| 결정 요인 | 반자동 수평 압축기 | 전자동 수평 압축기 | 수직형 PET 압축기 |
|---|---|---|---|
| 최적의 선택 | 재활용 가능한 자원의 흐름이 안정적인 중규모 운영 | 일일 처리량이 많은 대규모 연속 생산 현장 | 배치 로딩 방식의 중소규모 사이트 |
| 자동화 수준 | Hydraulic compression with manual or assisted tying | Automatic tying with configured feeding and discharge | 수작업 및 묶는 작업이 더 많아집니다. |
| 공급 방법 | 직접 공급 또는 선택적 사이클론 보조 공급 | 컨베이어 공급식 연속 적재 | 수동 일괄 충전 |
| 발자국과 복잡성 | Depends on model, infeed equipment and bale handling space | 가장 큰 설치 공간과 시스템 복잡성 | 가장 컴팩트한 솔루션 |
| 언제 선택해야 할까요? | 완전 자동화 없이 수직 베일링보다 한 단계 업그레이드된 시스템이 필요할 때 | 대규모 생산량 증대와 노동력 절감이 정당화될 때 | 음량이 적당하고 공간이 제한적일 때 |
전체 표를 보려면 가로로 스와이프하세요.
기술 사양
Compare seven semi-automatic horizontal baler models for waste paper, cardboard and approved recyclable streams. Values are reference specifications; confirm the final machine configuration and achievable output for your material.
WB Models — Reference Bale Dimensions
| 모델 | RTM300WB7070 | RTM400WB7280 | RTM600WB10080 | RTM1000WB11085 | RTM1000WB110110 |
|---|---|---|---|---|---|
| 압력 | 30톤 | 40톤 | 60톤 | 100톤 | 100톤 |
| 주요 구동 모터 동력 | 11 kW | 11 kW | 15 kW | 30kW | 30kW |
| 사이클 타임 | — | 19초 | 23초 | 36초 | 42초 |
| 석유 저장소 | — | 240리터 | 380리터 | 1460리터 | 1600리터 |
| 벨팅 수 | 3줄 | 4줄 | 4줄 | 4줄 | 5줄 |
| 피드 오프닝 | 700 x 690 mm | 1000 x 700 mm | 1200 x 980 mm | 1400 x 1050 mm | 1800 x 1050 mm |
| 챔버 크기 | — | 2200 x 700 x 780 mm | 2400 x 980 x 780 mm | 3000 x 1050 x 830 mm | 3700 x 1050 x 1050 mm |
| 베일 크기 | 900 x 700 x 700 mm | 1000 x 720 x 800 mm | 1000 x 1000 x 800 mm | 1300 x 1100 x 850 mm | 1600 x 1100 x 1100 mm |
| OCC용 베일 밀도 | 400 - 500 kg/m³ | 400 - 500 kg/m³ | — | — | — |
| 처리량 | 0.5 - 1 톤/시간 | 0.5 - 1 톤/시간 | 1~2톤/시간 | 1.5~3톤/시간 | 2~6톤/시간 |
| 기계 무게 | 4톤 | 4톤 | 5.2톤 | 12톤 | 18톤 |
| 전체 치수 | 4200 x 1100 x 1900 mm | 5500 x 1100 x 2000 mm | 6100 x 1400 x 2000 mm | 7450 x 1600 x 2300 mm | 8200 x 1600 x 3500 mm |
전체 표를 보려면 가로로 스와이프하세요.
WS Models — Variable Bale Length
| 모델 | RTM400WS7280 | RTM1000WS110125 |
|---|---|---|
| 압력 | 40톤 | 100톤 |
| 주요 구동 모터 동력 | 11 kW | 55kW |
| 벨팅 수 | 4줄 | 5줄 |
| 피드 오프닝 | 1000 x 690 mm | 2080 x 1076 mm |
| 베일 크기 | 가로 720mm x 세로 800mm | 가로 1100mm x 세로 1250mm |
| OCC용 베일 밀도 | 350 - 450 kg/m³ | 400 - 500 kg/m³ |
| 처리량 | 0.5 - 1 톤/시간 | 5~8톤/시간 |
| 기계 무게 | 5톤 | 16.5톤 |
| 전체 치수 | 4800 x 1500 x 2000 mm | 9100 x 2500 x 4300 mm |
전체 표를 보려면 가로로 스와이프하세요.
L denotes variable bale length. A dash means that the value is not listed and must be confirmed. OCC density values apply to corrugated cardboard, not every material. Throughput depends on feed density, moisture, feeding consistency, tying time and bale handling. RTM400WB7280 is also listed as RTM-400WB7280; it is shown once here.
Baler Configurations
Reference equipment photos. The final gate, infeed and discharge arrangement depends on the selected model and configuration.
베일러가 작동하는 모습을 보세요
산업 현장에서 반자동 수평형 압축기가 폐기물 수집 및 압축 성형을 어떻게 처리하는지 간단히 살펴보겠습니다.
자주 묻는 질문
공장에서 반자동 수평형 베일러를 평가할 때 흔히 묻는 질문들입니다.
Yes. Waste paper, OCC, carton offcuts and paper trims are core applications. Select the feed opening, chamber and bale dimensions around the size and volume of your material. PET bottles and PP/PE film require confirmation of the model and configuration.
The WB table lists reference bale dimensions for each model. The WS table uses L for variable bale length. The tables do not imply that gate design, controls or discharge arrangements are identical; confirm these details in the final proposal.
No. These machines require operator involvement in manual or assisted tying and bale handling. Manual or PLC-based controls can be specified by model, but the control system alone does not make tying fully automatic.
An optional cyclone or scrap collection system can be considered for suitable paper trims and lightweight scrap. Conveyor feeding may also be specified. Material characteristics, collection volume and plant layout must be checked before integration.
The equipment photos include an open-gate configuration. Gate design, bale release and handling clearance must be confirmed for the selected WB or WS model rather than assumed to be identical across the range.
The listed figures are reference values. Actual throughput depends on material bulk density, moisture, feeding consistency, tying time and handling. The listed OCC density ranges apply to corrugated cardboard and should not be used as guaranteed values for plastic film, bottles or other materials.
Share your material type and photos, hourly or daily volume, maximum feed size, required bale dimensions and density, shift pattern, power supply and available space. Also specify the feeding method, control preference and any collection equipment to be integrated.
귀사의 생산량에 맞는 적합한 수평형 베일러가 필요하십니까?
자재 종류, 시간당 생산량, 베일 요구량 및 공장 배치도를 보내주시면, 반자동 수평형 베일러와 완전 자동 라인 중 어떤 것이 더 적합한지 판단하는 데 도움을 드리겠습니다.