Nagy visszanyerésű örvényáramú leválasztó finom alumíniumhoz
Recover valuable fine aluminum and other non-ferrous metal particles from PET flakes, glass cullet, incinerator bottom ash, e-waste, and fine mixed recycling streams. The high-frequency concentric rotor is engineered for stable separation of particles as small as 2 mm.
Fine Non-Ferrous Metal Separation in Action
See how the high-frequency rotor generates eddy currents that eject aluminum and other non-ferrous particles away from the main material stream.
Maximize Purity and Recovery Value
Fine aluminum is easy to lose in conventional sorting. This ECS design helps recycling plants capture more value while improving the purity of downstream plastic, glass, ash, and metal fractions.
Fine Particle Recovery
Optimized for small non-ferrous fragments, the separator can recover fine aluminum particles down to about 2 mm in suitable feed streams.
Higher Product Purity
Removing aluminum, brass, copper, and other non-ferrous contaminants helps improve the quality of PET flakes, glass cullet, ash products, and upgraded scrap.
High-Intensity Rotor
The concentric rare earth magnet rotor creates a strong and uniform field for reliable ejection of small conductive particles across the belt width.
Adjustable Separation Point
Rotor speed, belt speed, feeding condition, and splitter position can be tuned to match changing material mixes and recovery targets.
Industrial-Ready Design
Heavy-duty motors, wear-resistant components, and a practical cantilever frame help the system handle demanding recycling environments.
Better Return on Waste Streams
Recovering small aluminum fractions can turn material that was previously lost into a saleable metal stream and reduce contamination penalties.
How the Eddy Current Separator Works
Material is spread into a thin layer, accelerated over a high-speed magnetic rotor, and separated by the different flight paths of non-ferrous and non-metallic particles.
Uniform Feeding
A stable single-layer feed improves exposure to the magnetic field and supports repeatable separation.
High-Speed Rotor
The magnetic rotor spins at high speed and induces eddy currents inside conductive non-ferrous particles.
Particle Ejection
Aluminum and other conductive metals are thrown forward while non-metallic material follows a shorter trajectory.
Splitter Collection
The adjustable splitter divides recovered metal from clean material according to purity and recovery requirements.
Uniform Feeding
Material is distributed evenly before entering the separation zone.
High-Speed Rotor
The rotor creates a fast-changing magnetic field at the belt end.
Particle Ejection
Conductive metals are pushed into a different flight path.
Splitter Collection
Separated fractions are collected for reuse, sale, or further processing.
Where Fine Aluminum Recovery Delivers Value
The separator is suitable for plants that need to recover small non-ferrous metals or remove conductive contamination before downstream processing.
PET műanyag pelyhek
Removes fine aluminum and non-ferrous contaminants to improve rPET flake purity before extrusion or food-grade upgrading.
Plastic purificationIncinerator Bottom Ash
Recovers valuable fine aluminum and other non-ferrous metals from processed ash fractions.
Metal recoveryÜveg újrahasznosítás
Purifies crushed glass by removing aluminum caps, foil fragments, and other conductive contaminants.
Cullet cleaningZORBA fejlesztés
Improves shredded non-ferrous scrap quality by separating aluminum-rich fractions from mixed metal streams.
Scrap upgradingE-Waste Processing
Helps recover fine conductive metals from shredded electronic scrap and circuit board processing residue.
WEEE separationÖntödei maradványok
Separates non-ferrous particles from casting sand and other foundry return streams.
Industrial residueEddy Current Separator Configuration
Representative machine views and principle diagrams for fine non-ferrous metal recovery applications.
Built for Fine Fraction Separation
The machine combines strong rotor performance, stable feeding, practical adjustment, and service-friendly construction for continuous recycling operations.
Nagyfrekvenciás rotor
High-performance NdFeB rare earth magnets deliver strong surface magnetic intensity at rotor speeds up to 4000 RPM.
Egyenletes vibrációs adagoló
Optional vibratory feeding helps create an even single-layer material bed for consistent separation performance.
Állítható osztólemez
The splitter position can be tuned by angle, height, and distance to balance purity and recovery rate.
Gyorsan cserélhető szíjrendszer
The cantilever frame design supports faster conveyor belt replacement and reduces maintenance downtime.
Eddy Current Separator Specifications
Reference specifications for common models. Final selection depends on feed size, material composition, target recovery, and available plant layout.
| Modell | Dimensions L x W x H | Hatékony övszélesség | Rotor sebessége | Szalagsebesség | Motorképesség |
|---|---|---|---|---|---|
| 40A | 2080 x 1357 x 1100 mm | 330 mm | 0-3000 RPM | 0-2 m/s | 0.75 kW |
| 65A | 3300 x 1500 x 1200 mm | 520 mm | 0-4000 RPM | 0-2 m/s | 1,5 kW |
| 80A | 3300 x 1700 x 1200 mm | 670 mm | 0-4000 RPM | 0-2 m/s | 2,2 kW |
| 100A | 3300 x 1900 x 1200 mm | 840 mm | 0-4000 RPM | 0-2 m/s | 2,2 kW |
| 120A | 3300 x 2000 x 1200 mm | 1040 mm | 0-4000 RPM | 0-2 m/s | 2,2 kW |
| 140A | 3300 x 2130 x 1587 mm | 1200 mm | 0-4000 RPM | 0-2 m/s | 2,2 kW |
Mobilon huzza oldalra a teljes tablazat megtekintesehez.
Megbízható támogatás az eszköz élettartama alatt
A telepítési tervezéstől a szokásos karbantartásig a szolgáltatás csapata segítségével az eszköz biztonságos, állandó és hatékony működését biztosítjuk.
1 év korlátozott garancia
A biztosítási lefedettség egy évig tart a fő mechanikai és elektromos alkatrészek gyártási hibáira. A normál kopásos alkatrészek és a helytelen működésből eredő sérülések különkezelésre kerülnek.
Telepítési útmutatás
Lágyítás, alapozás, üzemanyagellátás, szabad tér, vonalintegráció és üzembe helyezési útmutatást biztosítunk a zökkenőmentes telepítés és megbízható indítás érdekében.
Részegyes alkatrészekellátás
Cserélhető kopásos alkatrészek, csapágyak, tömítések, érzékelők, elektromos alkatrészek és egyéb szolgáltatási cikkek állnak rendelkezésre a tervezett karbantartás és hosszú távú működéshez.
Technikai támogatás
Távoli hibakeresés, működési ajánlások, karbantartási útmutatás és választható helyszíni szolgáltatás áll rendelkezésre, amikor a projekt további támogatásra szorul.
High-Recovery Eddy Current Separator FAQs
Answers to key questions about fine aluminum recovery, rotor selection, particle size, and upstream magnetic protection.
Recover More Fine Aluminum from Your Recycling Stream
Send us your material details and throughput target. Our team will help match the rotor width, feeding method, splitter setup, and upstream magnetic protection to your application.
