The 2026 textile shredder machine price range is $35,000–$150,000 for a single-shaft machine processing roughly 200–2,000 kg/h. Double-shaft machines run $90,000–$220,000 at about 1,000–3,000 kg/h, while a complete line with conveyors, magnetic separation, secondary sizing, and controls typically budgets $120,000–$350,000. Those ranges are wide because textile shredder price depends on the feed, output size, rotor, knife steel, controls, and supply scope. This guide separates the machine price, full textile recycling machine cost, recurring operating cost, and expected payback.
Textile Shredder Machine Price by Type in 2026
| Machine type | 일반적인 용량 | 가격대 | 가장 좋은 |
|---|---|---|---|
| 단축 파쇄기 | 200–2,000 kg/h | $35,000–$150,000 | Garments, offcuts, controlled output size |
| 이중축 파쇄기 | 1,000–3,000 kg/h | $90,000–$220,000 | Baled textiles, mixed bulky waste, primary reduction |
| Rotary crusher / cutting mill (secondary) | matched to primary | $25,000–$70,000 | Tight 20–30 mm sizing after a primary shredder |
| RDF/fuel line (shredder + magnet + screening) | 1~3톤/시간 | $150,000–$350,000 | Cement kiln fuel, 50–100 mm strips |
| Wiping cloth / rag line | 0.5–1.5 t/h | $120,000–$300,000 | Sized fabric pieces, metal-free output |
| Pyrolysis / fine-sizing feed line | 1–2 t/h | $160,000–$350,000 | Two-stage sizing to 20–30 mm with buffer and dosing |
All figures are reference ranges for typical configurations. Energycle manufactures the size-reduction core of these systems — single-shaft shredders, double-shaft shredders and secondary crushers. Complete-line figures are market references to help you budget the full installation around those machines.
Two patterns explain most of the spread. First, price scales with rotor width and installed power more than with any other specification — a 600 mm rotor with a 37 kW motor and a 2,000 mm rotor with 160 kW are different machines in every dimension. As a concrete reference point, a 1,000 kg/h single-shaft textile shredder typically lands at $80,000–$90,000 before line equipment. Second, a complete line always costs more than the shredder inside it: infeed conveyor, magnetic separation, discharge, and controls typically add 40–80% on top of the bare machine. The full textile recycling machine cost should also include freight, installation, commissioning, initial spare parts, and any dust or fire controls required at the site.
What Increases a Fabric Shredder Machine Price?
- Rotor width and motor power. The core driver. Match it to your real throughput target with headroom, not to the nameplate of the cheapest machine that “should” cope.
- Knife material, heat treatment, and design. D2 is a common industrial baseline and is often compared with JIS SKD11, but buyers should not assume two quotations use identical steel or heat treatment. Request the material certificate, hardness range, usable cutting edges, and regrinding limit. DC53 and carbide-tipped options cost more up front but may extend the service interval on abrasive or contaminated feed. Our shredder blade steel guide explains the trade-off.
- Anti-wrapping rotor design. Textiles wind around rotating parts — the defining failure mode of this material. Purpose-built textile rotors with fiber-stripping geometry cost more than generic plastic-shredder rotors and are the difference between running and cleaning.
- Screen and hydraulic ram configuration. Screen size sets output size; a ram designed for compressible, springy material keeps the rotor loaded without stalling it.
- Line equipment around the shredder. Chain-belt infeed conveyor, overband magnet for zippers and buttons, discharge conveyor, and — where output size matters — a secondary crusher. This is where a $85,000 machine becomes a $150,000 line.
- Gearbox, motor, and controls. A higher service-factor gearbox, specified motor brand such as Siemens, PLC coordination, and variable-frequency drives raise the initial price but improve overload handling, speed control, and parts support. Local electrical requirements also matter: 460–480 V/60 Hz for North America, CE documentation for Europe, and project-specific safety circuits. Certification and controls typically add 5–15%.
- Dust and fire management. Textile dust is combustible. Depending on material and local code, dust extraction and spark detection add real cost — and are much cheaper at design time than after an incident.
Beware of Cheap Textile Shredders for Sale
The lowest textile shredder price on the market is almost always a generic plastic shredder with the word “textile” added to the listing. It shreds fabric — for a while. Then long fibers work into the gap between rotor and casing, wrap the shaft, and the machine spends more hours being cut free with knives than running. In trial runs at our factory, the same batch of mixed garments that flows through an anti-wrapping rotor will stall a standard rotor within the first hour.
수학적 사항이 스티커보다 중요합니다. $15,000 만큼 비용이 저렴하지만 하루에 두 시간을 포장에 소비하는 기계는 250일 계획에 따라 연간 약 500 생산 시간을 소비합니다. 비교할 때, 판매 중fabrics shredder, 로터 기하학, 날 칭인증서, 기어박스 서비스 팩터, 테스트 통량, 포함된 보호 장치, 현지 부품 지원 등을 평가하세요—not only the bottom-line number. The Energycle textile waste single-shaft shredder 페이지는 anti-winding cutting geometry, D2 날, 히드레일리크 피드, 전기 패키지를 포함한 fabric-specific 구성을 보여줍니다.
운영 비용: Textile Shredder를 톤당 운영하는 비용은 얼마인가요
구매 가격은 한 번의 비용입니다; 이 비용은 톤마다 반복됩니다:
| 비용 항목 | типичное значение | 노트 |
|---|---|---|
| 전기 | 25–50 kWh/ton | Loose garments draw less than compressed bales |
| 날 치환 | $1–$4/ton | Depends on steel grade and contamination |
| 스크린 및 수식 부품 | $0.5–$2/ton | Higher with abrasive contamination (sand, buttons) |
| 노동 | 0.5–1 operator per shift | One operator can usually cover the full line |
Two practical levers keep these numbers at the low end. Clean feed matters: every zipper that reaches the knives shortens the regrind cycle, which is why a magnet ahead of the secondary stage pays for itself. And blade steel selection is a running-cost decision, not a purchase decision — a DC53 knife set that costs 30% more but regrinds twice as many times is cheaper per ton from day one.
ROI: Textile Waste Disposal Costs into Revenue
A textile shredder ROI calculation adds three yearly gains—avoided disposal charges, saleable output, and logistics savings—then subtracts electricity, knives, screens, labor, and maintenance. Use verified local figures rather than a universal payback claim because disposal fees, output buyers, operating hours, and contamination vary by project.
Annual net benefit = avoided disposal cost + net material revenue + logistics savings − electricity − blades and wear parts − incremental labor and maintenance.
Simple payback = installed textile recycling machine cost ÷ annual net benefit.
다음 예시는 1톤 당 시간당 8시간을 운영하고 연간 250일을 운영하는 라인의 계산 방법을 보여줍니다. 이는 계획 예시이며 성능이나 수익 보장은 아닙니다.
| ROI 입력 | 보여주는 가정 | Annual effect |
|---|---|---|
| 처리된 텍스타일 쓰레기 | 2,000톤/년 | 계산 기준 |
| 배제된 처리비용 | $45/톤 | +$90,000 |
| 순 판매가치 | $35/입력톤 | +$70,000 |
| 전기 | $0.12/킬로와트당 35 킬로와트/톤 | −$8,400 |
| 칼, 스크린, 및 수리비용 | $5/입력톤 | −$10,000 |
| 증가적인 노동 및 유지보수 | 현장 추정 | −$30,000 |
| Annual net benefit | $111,600 | |
| 설치 프로젝트 비용 | $180,000 | |
| Simple payback | 1.61년 또는 약 19개월 | |
모든 가정을 처리 인보이스, 전력 요금표, 구매자 견적서, 질량 균형 검사, 유지보수 추정으로 대체하세요. 판매 가능 부분만 계산하고, 운반 또는 추가 처리 비용을 그 가치에서 차감하고, 운영 시간이 낮고 판매 가격이 낮은 하락 시나리오를 실행하세요. 이는 프로젝트가 판매 예측보다 불리한 조건에서도 이익을 돌릴 수 있는지를 밝혀냅니다.
신용 텍스타일 쓰레기 파쇄기
사용된 단축 텍스타일 쓰레기 파쇄기는 새로운 가격의 40–60%에 정기적으로 등장합니다. 텍스타일 전용 주의사항: 기계가 실제로 사용한 재료를 확인하세요. 5년 동안 고정 플라스틱을 사용한 쓰레기 파쇄기는 루터와 케이스의 수리 패턴이 텍스타일 감싸기를 더 나쁘게 만들 수 있으며, 반대 구조를 적용하는 것은 거의 경제적이지 않습니다. 사용된 기계를 선택하면, 우리가 설명한 동일한 검사 논리를 적용하세요. used recycling equipment guide — acceptance criteria under load, documentation, and a written missing-parts list.
How to Get an Accurate Textile Shredder Quote
A quote is only as accurate as the information behind it. Send these six items and you get a real number instead of a placeholder:
- Material type and mix (garments, offcuts, carpet, mixed post-consumer)
- Feed form — loose, baled (bale size and weight), or rolls
- Required output size, and what the output feeds (baler, pyrolysis auger, fiber opener)
- Target throughput in kg/h, plus planned operating hours
- Site voltage and frequency
- Moisture and contamination level, if known
Better still, let the machine answer. We run free trial shredding with your material at our factory, film the run, and quote the exact configuration that produced the output you watched — screen size, knife set and line layout included. If your project feeds a pyrolysis reactor or another size-critical process, our guide to shredding waste textiles for pyrolysis explains how output size requirements change the line design and the budget.
자주 묻는 질문
소형 플라스틱 파이버 파쇄기 비용은 얼마인가요?
Entry-level industrial single-shaft machines for 200–500 kg/h start around $35,000–$60,000. Desktop and lab-scale units exist below that, but they are sampling tools, not production equipment — see our 텍스타일 파쇄기 가이드 for where the size classes separate.
가장 많이 영향을 미치는 텍스타일 파쇄기 가격에 무엇이 있을까요?
Rotor width and motor power set the base price; anti-wrapping rotor design and knife configuration set whether the machine works on fabric. Line equipment around the shredder — conveyors, magnet, secondary sizing — typically adds 40–80% to the bare machine price.
텍스타일 파쇄기를 운영하는 데 비용은 얼마인가요?
Plan on 25–50 kWh of electricity per ton, $1–$4/ton for knife regrinding, and $0.5–$2/ton for screens and wear parts. Clean, metal-free feed keeps every one of those numbers at the low end.
섬유 파쇄 라인이 얼마나 빨리 수익을 돌리나요?
Payback has no universal range. In the worked example above, a $180,000 installed system produces an estimated $111,600 annual net benefit, giving a simple payback of about 19 months. Replace the example with your disposal invoices, buyer price, operating schedule, power tariff, and maintenance estimate before making an investment decision.
동일한 용량의 견적이 왜 이렇게 많이 달라지는가요?
Because “capacity” hides the configuration: knife steel, rotor design, screen options, conveyors, magnet, controls and certification can each move the price by thousands. Compare quotes line by line against the seven cost drivers above — or send the same material sample to each supplier and compare filmed test results.
결론
A useful textile shredder machine price must match the material, output size, throughput, rotor, knife steel, controls, and full supply scope. Compare the installed textile recycling machine cost and the annual net benefit—not only the bare-machine quotation. Send Energycle your material details or book a free filmed trial run to receive a configuration and quotation based on your fabric rather than a generic list price.
