Dewatering & Densifying
Plastic Film Squeezing and Drying Machine
The ultimate solution for dewatering washed PP/PE films and woven bags. Our squeezer reduces moisture to 1–5%, preparing your material for high-quality pelletizing and boosting your line efficiency.
Problem vs Solution
Moisture Reduction Challenge
Why traditional drying falls short — and how mechanical squeezing delivers better results at lower cost.
| Challenge | Traditional Dryer | Squeezer Dryer |
|---|---|---|
| Residual Moisture | 20–30% | 1–5% |
| Material Density | Loose, fluffy film | Compact dense lumps |
| Extruder Feed Stability | Unstable, frequent clogging | Consistent, stable feeding |
| Thermal Degradation | High heat exposure | Low heat, preserves polymer |
| Process Steps | Multiple drying stages | One machine replaces all |
Step by Step
Operating Sequence
From wet washed film to extrusion-ready dense lumps in five efficient steps.
Feeding
Wet washed film or woven bag scrap enters the hopper for continuous processing.
Squeezing
A high-torque screw pushes material through a perforated barrel under mechanical pressure.
Dehydration
Water is expelled through perforations, reducing moisture down to 1–5% residual level.
Densification
Material is compacted into high-density lumps by controlled frictional heat.
Discharge
Output is ready for direct feeding into pelletizing extruder equipment.
Engineered for Results
Performance Advantages
One machine handles dewatering and densifying — delivering drier, denser material for higher pelletizing throughput.
Efficient Moisture Reduction
Reduces 10–35% moisture down to 1–5% through mechanical pressure, far outperforming traditional centrifugal or hot-air drying methods.
Density & Volume Optimization
Transforms loose film into dense lumps for faster, consistent feeding into downstream extruders.
Minimized Heat & Degradation
Low thermal load preserves polymer quality and maximizes the value of your recycled pellets.
Higher Extruder Efficiency & Pellet Quality
Drier, denser input boosts pelletizing throughput and eliminates defects like bubbles and voids caused by excess moisture. Extrusion-ready output from a single machine.
Video Demonstration
Watch the plastic film squeezing machine in real production — from wet film input to dense lump output.
Machine Details & Gallery
A closer look at the squeezer's key components and build quality.
Downstream Value
Downstream Applications
Densified output feeds directly into multiple high-value manufacturing processes.
High-Quality Pellet Production
Densified lumps provide a stable feedstock for premium-grade PE/PP pellets with minimal defects.
Injection Molded Products
Pellets are suitable for pallets, crates, and many industrial molded parts requiring consistent material quality.
New Film & Bag Extrusion
High-quality pellets can be used in new non-food-grade film and bag products for packaging applications.
Technical Specifications
Four model sizes covering 200–1000 kg/h to match your line capacity requirements.
| Model | Screw Diameter | Applicable Material | Output |
|---|---|---|---|
| ERM-250C | 250 mm | PP / PE Film and Woven Bags | 200–350 kg/h |
| ERM-300S | 300 mm | PP / PE Film and Woven Bags | 400–550 kg/h |
| ERM-320P | 320 mm | PP / PE Film and Woven Bags | 600–750 kg/h |
| ERM-350M | 350 mm | PP / PE Film and Woven Bags | 800–1000 kg/h |
User Feedback
What our customers say about the plastic film squeezing machine.
We replaced our old centrifugal dryer with this squeezer and output increased by nearly 30% because feeding became much more stable.
Pellet quality improved dramatically. We no longer see voids and bubbles caused by excess moisture.
One machine now handles both dewatering and densifying with lower energy use. The ROI was clear from the beginning.
Frequently Asked Questions
It is designed for washed soft plastics like PP/PE films, non-woven fabrics, and woven bags. For other materials, contact our engineers for consultation.
Final moisture is material-dependent, but typically reaches 1–5% after squeezing, compared to 20–30% from traditional drying methods.
No. The process creates limited frictional heat and has much lower thermal load than hot-air drying, helping preserve polymer quality for downstream pelletizing.
Get a Custom Squeezer Configuration
Each squeezer includes a 1-year limited warranty. Factory engineers support installation, commissioning, and operator training. Contact our specialists for a detailed quote.